Vandy Vape Bonza Kit // Bonza 1.5 RDA

$119.00

Or 4x interest free payments of $29.75 NZD

Brand Vandy Vape

The most highly anticipated hardware release of 2018 is finally here: the Vandy Vape Bonza Kit has landed! 

Designed in collaboration with the one and only Vaping Bogan, the Bonza Kit is the absolute pinnacle of modern mech tube design. From its stippled exterior to its smoothly machined interior, every inch of this thing is a work of art, and boy oh boy does it pack a punch.

Compatible with 18650/20700 and 21700. The Bonza utilities pure copper to help conduct electricity, or full stainless steel.

OHM-MY he's hit the nail on the mark with this one!

  • Maximum Dimensions: 118.4mm x 27mm
  • Interchangeable sleeve system offers further customisation in the future
  • Battery: single 21700 / 20700 / 18650 (sold separately)
  • Magnetic and spring buttons included
  • Insulated ring and tube provide extra safety
  • 510 hybrid connection
  • Pure copper conducts efficiently and with minimal voltage drop
  • Improved post deck easier to build than ever
  • Top cap locking and new dual AFC

In The Box

  • 1 x Bonza Mech Mod
  • 1 x Bonza 1.5 RDA
  • Accessory Bag (o-rings, screws, BF pin, screwdriver)
  • User Manual
  • 1 x 18650 Battery Adaptor
  • 1 x 510 Adaptor

 

If you are new to vaping and do not have a clear understanding and comprehension of Ohms Law and battery safety, this is not the device for you. 
This is an unregulated, mechanical device. Improper use, or build on this device can cause serious bodily harm. Never use batteries that are torn, nicked or dented with this device. 
The Vape Shop will not claim liability for any results of improper use. If you have any concerns, contact our support team for more information on mechanical devices.

More Details →

CUSTOMER REVIEWS

Based on 1 review Write a review

Tesla Invader IV Kit / Invader IV RDA // 280W

$129.00

Or 4x interest free payments of $32.25 NZD

Brand Teslacigs

The Tesla Invader IV 280W Kit has arrived at The Vape Shop NZ. With the massive success of its predecessor, Teslacigs have released their new, lighter VV Tesla Invader IV with Invader IV RDA. Now compatible with dual 21700, 20700 or 18650 batteries, essentially improving the potential battery life, while retaining the same performance of high drain 18650s. 

The Invader series are an incredibly durable range of mods that are built to last. With more range of power on the 5 step potentiometer and increased resistance range, the Invader IV is able to run between 3-8 volts and down to 0.08Ω.

The highly anticipated Tesla Invader IV is one of the most reliable, hard hitting mods on the market. While the Invader IV hits like a series mechanical mod, it still has the safety features of a standard regulated mod without all the bells and whistles getting in your way. Plus the innovative Invader 4 RDA which features convenient dual coils build deck, adjustable bottom airflow system and Resin wide bore drip tip, the Teslacig Invader IV Kit is definitely an excellent vape device.

With incredible efficiency and no nonsense design, the Tesla Invader IV is the perfect choice for people who want unadulterated power and ease of use. The Invader IV has a maximum power output of 280W. The Invader IV also supports USB input charging, so you don't need to rely on an external charger to charge your batteries.

We advise a thorough understanding of ohm’s law for using this variable voltage device. You will need to calculate the correct voltage to achieve the wattage level that your coil/s require.

Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries. 

  • Dimension: 92 x 60 x 28mm
    • Material:  Aluminium alloy
  • RDA Dimensions: 25 x 34mm
    • Dual post build deck
  • Cell Type: Two high-drain 18650/20700/21700 cells
    • Batteries Sold Seperately
  • Maximum Output Wattage: 280W
    • Voltage Adjust: I-V level
    • Output Voltage Range: 3-8V
    • Maximum Output Current: 53A
  • Resistance Range: 0.08ohm-3.0ohm
    • Input Voltage Range: 6.4V-8.4V
    • Standby Current: <50uA 
    • USB: 5V/1.5A
  • LED Indicator: Blue-Green-Red
  • Protections: Over puffing protection, reverse connection protection, atomizer short-circuit protection, low voltage alert, overheat protection, over-current protection 
  • Thread: 510

In The Box

1x Invader 4 Mod
1x Invader 4 RDA
2 x Wires
3 x Silicone Rings
1x Wrench
4 x Screws
Organic Cotton
USB Cable
2 x User Manuals
      More Details →

      CUSTOMER REVIEWS

      No reviews yet Write a review

      Tesla Invader IV Mod // 280W

      $109.00

      Or 4x interest free payments of $27.25 NZD

      Brand Teslacigs

      The Tesla Invader IV 280W Mod has arrived at The Vape Shop NZ. With the massive success of its predecessor, TeslaCigs have released their new, lighter VV Tesla Invader IV. Now compatible with dual 21700, 20700 or 18650 batteries, essentially improving the potential battery life, while retaining the same performance of high drain 18650s. 

      The Invader series are an incredibly durable range of mods that are built to last. With more range of power on the 5 step potentiometer and increased resistance range, the Invader IV is able to run between 3-8 volts and down to 0.08Ω.

      The highly anticipated Tesla Invader IV is one of the most reliable, hard hitting mods on the market. While the Invader IV hits like a series mechanical mod, it still has the safety features of a standard regulated mod without all the bells and whistles getting in your way. 

      With incredible efficiency and no nonsense design, the Tesla Invader IV is the perfect choice for people who want unadulterated power and ease of use. The  The Invader IV has a maximum power output of 280W, and fires down to a super low 0.08ohm. The Invader IV also supports USB input charging, so you don't need to rely on an external charger to charge your batteries.

      We advise a thorough understanding of ohm’s law for using this variable voltage device. You will need to calculate the correct voltage to achieve the wattage level that your coil/s require.

      • Dimension: 92 x 60 x 28mm
      • Material:  Aluminium alloy
      • Cell Type: Two high-drain 18650/20700/21700 cells
      • Maximum Output Wattage: 280W
      • Voltage Adjust: I-V level
      • Output Voltage Range: 3-8V
      • Maximum Output Current: 53A
      • Resistance Range: 0.08ohm-3.0ohm
      • Input Voltage Range: 6.4V-8.4V
      • Standby Current: <50uA 
      • USB: 5V/1.5A
      • LED Indicator: Blue-Green-Red
      • Protections: Over puffing protection, reverse connection protection, atomizer short-circuit protection, low voltage alert, overheat protection, over-current protection 
      • Thread: 510

      In The Box

      • 1x Invader IV Mod
      • 1x USB Cable
      • 2x 18650 Adapters 
      • 1x Information Card
      More Details →

      CUSTOMER REVIEWS

      Based on 1 review Write a review

      iJoy Zenith 3 Mod / 300W // Includes 2x 20700 Batteries

      $98.00

      Or 4x interest free payments of $24.50 NZD

      Brand iJoy

      The Zenith 3 is the latest dual 20700 battery semi-mechanical box mod to land in NZ. Presenting with a unique easy to grip shape with hard lines and gorgeous colour accents, it features a voltage adjustable knob with 16 voltage levels from 2.4V-6.9V.

      The Zenith 3 box mod’s chipset is designed by IWEPAL and features short circuit protection, low power protection, reverse battery protection and has milliseconds fire speed with a maximum output of 300W and 50A discharge.

      The device is simple to operate, no overhang with large atomisers, supports USB charging, and is compatible with 20700 batteries for longer life. An 18650 battery adapter is included. 

      • Max Wattage: 300W
      • Size: 92*49*34.5mm 
      • Dual 20700 batteries mod with long battery life
      • Semi-mechanical High power Box Mod
      • 360 degree Adjustable Voltage Knob
      • 16 voltage levels to adjust from 2.4-6.9V
      • Screenless Design - Efficient Battery Use
      • Various protection
      • Large side fire button
      • Resistance Range: 0.05~3.0 ohm
      • USB port charging support
      In The Box
      1x IJOY Zenith 3 Box Mod
      2x 20700 3000mAh High Drain Batteries
      1x 18650 Adapter
      1x USB Cable
      1x Manual
      1x Warranty Card
      More Details →

      CUSTOMER REVIEWS

      Based on 1 review Write a review

      dotMod dotBox Dual Mech

      $204.00

      Or 4x interest free payments of $51.00 NZD

      Brand dotMod

      The newly released dotMod dotBox Dual Mech is now available in NZ, first with The Vape Shop!

      Feel the power in your hands with the latest from dotMod. Enter the Dual Mech.

      Harness the raw power in Series Mode. Or maximise your battery life in Parallel Mode. Have it your way!

      Brand New Ergonomic Design

      Perfect for the Lefties and the Righties, with the new button placement you'll be able to comfortably hold your mod however you want.

      Maximum Power

      Experience power like no other! While on Series Mode, cloud chasers will be able to push their cloud output to the max with by doubling the voltage for twice the power.

      Last Longer

      When switched to Parallel Mode you'll love the ability to vape for much longer and still experience the power of two 18650 batteries.

      • Mode Selection switch [Parallel, Off, Series] utilising two 18650 batteries
      • Magnetic front and rear panels for customisation
      • Replaceable power button
      • Short circuit protection features
      • Anodised aluminum construction of the chassis and both doors

      IMPORTANT NOTICE: This product is for advanced users only. This is a mechanical (not regulated) mod, intended for use by experienced vapers, and requires regular maintenance. Click here for instructions on properly maintaining your dotBox Dual Mech.

      Improper use, transport, or storage may cause fire or explosion. The operational range of the resistance is from 0.1Ω to 3.0Ω. Do not build below 0.1Ω resistance. Use at your own risk and take appropriate precautions when using this device. This product is for advanced users only.

            In The Box
            1x dotBox Dual Mech 
            2x Removable Doors
            1x User Manual
            1x Warning Tab
            1x Certificate Of Authenticity 

            More Details →

            CUSTOMER REVIEWS

            Based on 1 review Write a review

            THC Tauren Mech Mod

            $89.00

            Or 4x interest free payments of $22.25 NZD

            Brand Thunderhead Creations

            The Tauren Mech Mod is a luxury mechanical mod by Thunderhead Creations. It features an innovative ball connected button for full 360° contact and no firing hesitation. Compatible with 21700, 20700 and 18650 batteries with the adaptor, this mod packs a punch. It is made of pure brass or copper with a gorgeous black cerakote finish. It comes in at 91mm tall by 26mm at its widest, and 24mm across the top.

            In The Box
            THC Tauren Mech Mod
            THC Chain
            Flanelette Bag
            18650 Adapter
            Warranty Card

              Mechanical Mod Safety

              If you are new to vaping and do not have a clear understanding and comprehension of Ohms Law and battery safety, this is not the device for you. 
              This is an unregulated, mechanical device. Improper use, or build on this device can cause serious bodily harm. Never use batteries that are torn, nicked or dented with this device. 
              The Vape Shop will not claim liability for any results of improper use. If you have any concerns, contact our support team for more information on mechanical devices.

              More Details →

              CUSTOMER REVIEWS

              Based on 4 reviews Write a review

              VGOD Pro Mech 2 Kit / Elite RDA // 24mm

              $168.00

              Or 4x interest free payments of $42.00 NZD

              Brand VGOD

              The world's most popular mech tube is now available in New Zealand!

              Bend tricks and chuck clouds with the VGOD Mech Pro 2 Kit. This kit is made for serious vapers! Featuring a copper chassis, CNC machined delrin comfort grips, and VGOD's own TriCon switch - the Mech Pro 2 offers the best in comfort, quality, and performance. 

              This kit includes both the VGOD Mech Pro 2 tube and the VGOD Elite RDA.

              VGOD Mech Tube

              • Unique CNC machined removable Delrin comfort sleeves.
              • TriCon switch comes with three independent pins increase surface contact with battery.
              • Carbon fibre switch with built-in self-adjusting battery ring to lock battery in place.
              • Comes with Elite RDA, 2mL juice well, dual post build deck.
              • Portable case included for convenient carrying and storage.
              • Dimension: 24 x 85.2mm
              • Material: Billet Copper/Stainless Steel/Gold.
              • Cell Type: Single high-drain 18650 cell (sold separately)
              • Thread: 510 hybrid thread.

              Elite RDA

              • Height: 33mm
              • Outside Diameter: 24mm
              • Thread: 510 thread
              • Juice Well: 9.25mm in depth
              • Liquid Capacity: 2mL

              In The Box

              • 1x VGOD PRO Mech 2 Mod
              • 1x VGOD Elite RDA
              • 1x VGOD Carry Case
              • 1x Manual
              • 1x Accessories Pack

               

              If you are new to vaping and do not have a clear understanding and comprehension of Ohms Law and battery safety, this is not the device for you. 
              This is an unregulated, mechanical device. Improper use, or build on this device can cause serious bodily harm. Never use batteries that are torn, nicked or dented with this device. 
              The Vape Shop will not claim liability for any results of improper use. If you have any concerns, contact our support team for more information on mechanical devices.

              More Details →

              CUSTOMER REVIEWS

              Based on 1 review Write a review
              Sale

              Vandy Vape Pulse BF Squonk Kit // 8mL

              $86.40

              Or 4x interest free payments of $21.60 NZD

              Brand Vandy Vape

              The Pulse Bottom Feed Squonk Box Kit by Vandy Vape has touched down in NZ! Taking a single 18650 or 20700 battery the Pulse is the first of its type in being completely affordable without sacrificing quality in its design. The device has a simple aesthetic with a side magnetic door that reveals the internal battery and squonk bottle compartment. Inside includes a manual disconnect for disabling the device while not in use so it may be pocketed without worry.

              • Locking power switch to help avoid accidental firing when not in use
              • Spring loaded 510 pin to accept many different length 510 pins of various designs
              • 8mL food grade soft squeeze silicone bottle
              • Copper contacts
              • Replaceable front and back panels
              • Manual Battery Disconnect
              • Requires a high amp 18650 or 20700 battery purchase here: Batteries
              • 8.0m food grade silicone bottle for squonking

              Retaining similar aesthetics from the original with a simple yet elegant appeal, the latest RDA in NZ from Vandy Vape, the Pulse 24 measures 24.4mm in diameter, innovative airflow style returns with side-mounted dual 3.5mm airslots that feeds into each pair of airflow tubes. The result is a concentrated and direct airway path to the deck with quad airflow tubes and acting as a leak resistant feature due to the angled orientation.

              The Pulse 24 BF integrates a quad terminal postless design, large terminal openings set into the deck and tightened via side-secured Phillips screws. The deck and chamber accommodates a wide range of large coil structures and a large liquid well. The well is cleverly designed for an efficient squonk-ready set-up with the included bottom-feeding 510 pin that feeds directly into the two sides of the juice well.

              In The Box
              1x Pulse BF Squonk Box Mod
              1x Pulse 24 BF RDA
              1x 16mm Drip Tip
              1 x 8ml Squonk Bottle
              1x 18650 Battery Adaptor
              2x Accessory Bags
              1x User Manual

               

              If you are new to vaping and do not have a clear understanding and comprehension of Ohms Law and battery safety, this is not the device for you. 
              This is an unregulated, mechanical device. Improper use, or build on this device can cause serious bodily harm. Never use batteries that are torn, nicked or dented with this device. 
              The Vape Shop will not claim liability for any results of improper use. If you have any concerns, contact our support team for more information on mechanical devices.

                More Details →

                CUSTOMER REVIEWS

                Based on 2 reviews Write a review

                Vandy Vape Pulse BF Squonk Mod // 8ml

                $64.00

                Or 4x interest free payments of $16.00 NZD

                Brand Vandy Vape

                The Pulse Bottom Feed Squonk Box Mod by Vandy Vape has touched down in NZ! Taking a single 18650 or 20700 battery the Pulse is the first of its type in being completely affordable without sacrificing quality in its design. The device has a simple aesthetic with a side magnetic door that reveals the internal battery and squonk bottle compartment. Inside includes a manual disconnect for disabling the device while not in use so it may be pocketed without worry.

                • Locking power switch to help avoid accidental firing when not in use
                • Spring loaded 510 pin to accept many different length 510 pins of various designs
                • 8mL food grade soft squeeze silicone bottle
                • Copper contacts
                • Replaceable front and back panels
                • Manual Battery Disconnect
                • Requires a high amp 18650 or 20700 battery purchase here: Batteries
                • 8.0m food grade silicone bottle for squonking

                In The Box
                1x Pulse BF Squonk Box Mod
                1x 18650 Battery Adaptor
                1x User Manual

                 

                If you are new to vaping and do not have a clear understanding and comprehension of Ohms Law and battery safety, this is not the device for you. 
                This is an unregulated, mechanical device. Improper use, or build on this device can cause serious bodily harm. Never use batteries that are torn, nicked or dented with this device. 
                The Vape Shop will not claim liability for any results of improper use. If you have any concerns, contact our support team for more information on mechanical devices.

                  More Details →

                  dotMod dotSquonk

                  $148.00

                  Or 4x interest free payments of $37.00 NZD

                  Brand dotMod

                  dotSquonk, the squonk you've been looking for, now available in NZ and delivered to your door overnight!

                  The dotSquonk that you can afford. With so many squonk boxes on the market, DotMod wanted to do the sqounk right. And part of being right is being in a price range that everyday advanced users can afford. Coming in at just under $150 before shipping, you can be bottom-feeding by Christmas in style!

                  Two ways to play. Refill your bottle by removing it or if you're in a hurry you can top fill using your unicorn style bottle, through your dotRDA24 squonk pin. You decide.

                  The perfect marriage. the dotSquonk brings out added features when utilized with the dotRDA24.  And with an upgraded center 510 pin (which is also removable) made of 24k gold plated brass, this is a mechanical mod with even better pull than our tube mods.   

                  Why it's awesome

                  1. Might just be best squonk in town.
                  2. Customise your dotSquonk's look with 2 doors. 
                  3. Pairs perfectly with the dotRDA24.
                  4. Use 20700 or 18650 batteries.
                  5. Top-fill through the dotRDA24 for on the go. 
                  6. Beveled edges for superior feel in your hand.

                  In The Box

                  1x dotSquonk 
                  2x Removable doors
                  1x 18650 Battery sleeve 
                  1x Juice Bottle (silicon with ultem top)
                  1x 510 connector o-ring
                  1x Brass 24k gold plated 510 squonk pin 
                  1x Certificate of authenticity 

                    Please note:

                    This product is for advanced users only.

                    Improper use, transport, or storage may cause fire or explosion. The operational range of the resistance is from 0.1Ω to 3.0Ω. Do not build below 0.1Ω resistance. Use at your own risk and take appropriate precautions when using this device.

                    If you are new to vaping and do not have a clear understanding and comprehension of Ohms Law and battery safety, this is not the device for you. 
                    This is an unregulated, mechanical device. Improper use, or build on this device can cause serious bodily harm. Never use batteries that are torn, nicked or dented with this device. 
                    The Vape Shop will not claim liability for any results of improper use. If you have any concerns, contact our support team for more information on mechanical devices.

                    More Details →

                    CUSTOMER REVIEWS

                    No reviews yet Write a review

                    dotMod Tiffany Blue Petri Lite - Limited Edition

                    $188.00

                    Or 4x interest free payments of $47.00 NZD

                    Brand dotMod

                    • Hard Hitting Naval Brass
                    • Anodised Aluminum Composite Button Design
                    • Precision Anodised Aluminum Tube And Body  
                    • 24K Gold Plated Threading And Accents
                    • 24K Gold Plated Copper Contacts
                    • Hybrid Connection
                    • Fully Masked Internals (no cleaning, ever) 
                    • Precision Micro-Engravings
                    • Serialised

                    In The Box

                    1x dotMod Tiffany Blue Petri Lite
                    1x dotMod Limited Edition 24K Gold Plated Brass Drip Tip
                    1x Original Petri Spring (light throw)
                    1x Super Heavy Silver Plated Beryllium Copper Spring
                    1x Certificate Of Authenticity
                    1x Mini Allen Key For Button Assembly

                     

                    If you are new to vaping and do not have a clear understanding and comprehension of Ohms Law and battery safety, this is not the device for you. 
                    This is an unregulated, mechanical device. Improper use, or build on this device can cause serious bodily harm. Never use batteries that are torn, nicked or dented with this device. 
                    The Vape Shop will not claim liability for any results of improper use. If you have any concerns, contact our support team for more information on mechanical devices.

                    More Details →

                    CUSTOMER REVIEWS

                    Based on 2 reviews Write a review
                    Sold Out

                    CoilART MAGE Mech Tricker Kit

                    $119.00

                    Or 4x interest free payments of $29.75 NZD

                    Brand CoilART

                    This product is unavailable

                    The pairing of the Mage mechanical mod and Mage RDA from CoilArt, the CoilArt Mage Mech Tricker kit combines high end performance and aesthetic beauty into one incredible little package. Constructed from billeted brass and covered in an eye catching multi-colour resin or subtle black frost finish, the Mage is a sight to behold.

                    Resin

                    • 24mm diameter
                    • 125mm overall height
                    • Magnetic fire button
                    • Billet brass construction
                    • Multicolour resin coating
                    • Internal insulation protection
                    • Self-adjusting battery contact
                    • Hybrid 510 connection
                    • 24K Gold plated deck
                    • Adjustable airflow

                    Black

                    • 24mm diameter
                    • 125mm overall height
                    • Magnetic fire button
                    • Billet red copper construction
                    • Black frost finish coating
                    • Internal insulation protection
                    • Self-adjusting battery contact
                    • Hybrid 510 connection
                    • 24K Gold plated deck
                    • Adjustable airflow
                    In The Box

                    1x CoilART Mage Mech Tricker Kit

                    If you are new to vaping and do not have a clear understanding and comprehension of Ohms Law and battery safety, this is not the device for you. 
                    This is an unregulated, mechanical device. Improper use, or build on this device can cause serious bodily harm. Never use batteries that are torn, nicked or dented with this device. 
                    The Vape Shop will not claim liability for any results of improper use. If you have any concerns, contact our support team for more information on mechanical devices.

                    More Details →

                    CUSTOMER REVIEWS

                    Based on 1 review Write a review
                    Sold Out

                    iJOY Zenith // 300W 50A

                    $68.00

                    Or 4x interest free payments of $17.00 NZD

                    Brand iJoy

                    This product is unavailable

                    The iJoy Zenith is now available in NZ! A simple to use yet powerful triple battery mod that has a maximum wattage output of 300 watt with the IWEPAL chipset. Standout features include the adjustable voltage lightning knob which allows you to easily adjust your voltage on the fly, a large tactile fire button that is located on the top of device and a classic and durable chassis that is comfortable to hold and carry. The Zenith requires three high amp 18650 batteries (sold separately) and an external charger to charge your 18650 batteries (sold separately).

                    • IWEPAL chipset
                    • Spring loaded 510 contact pin
                    • Maximum wattage: 300.0 W
                    • Working voltage: 9.3V - 12.6V
                    • Output voltage: 2.7V - 6.2V
                    • Maximum output current: 50A
                    • LED indicator light
                    • Magnetic battery back cover
                    • Low voltage alert
                    • 10 second protection
                    • Short circuit alert

                    Specifications
                    Size: 51mm x 41mm x 90mm
                    Battery: 3x 18650 cells

                    In the box
                    1x iJoy MAXO Zenith Mod
                    1x Manual

                    A sound understanding of ohm's law and battery safety is required for mechanical mods. Please contact us prior to purchase should you have any questions.

                    Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. We are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers. We only recommend using Lithium Ion rechargeable batteries with a control circuit (protection PCB) to assure safe charge, discharge, etc, use of lithium ion batteries without a protection circuit is potentially hazardous.

                    More Details →

                    CUSTOMER REVIEWS

                    Based on 1 review Write a review
                    Sold Out

                    Geekvape Karma

                    $54.00

                    Or 4x interest free payments of $13.50 NZD

                    Brand Geekvape

                    This product is unavailable

                    The Geekvape Karma polished copper mechanical mod with black accented button housing.
                    • High grade copper
                    • Treated to avoid oxidation
                    • Magnetic button
                    • Six air vents for heat dissipation and safety
                    • Direct to battery hybrid 510 connection
                    • 25mm x 84mm

                    In the box
                    1x Geekvape Karma Mechanical Mod
                    1x User manual

                    A sound understanding of ohm's law and battery safety is required for mechanical mods. Please contact us prior to purchase should you have any questions.

                    More Details →

                    CUSTOMER REVIEWS

                    Based on 1 review Write a review
                    Sold Out

                    VGOD Pro Mech

                    $124.00

                    Or 4x interest free payments of $31.00 NZD

                    Brand VGOD

                    This product is unavailable

                    The VGOD Pro Mech Mod is constructed of copper and treated with a durable matte black coating, the firing button features a self adjusting gold plated contact to ensure constant, efficient connectivity as well as minimising your tampering time when switching batteries by self adjusting.

                    • Billet copper construction
                    • Aerospace grade carbon fiber finished button
                    • Durable matte coating
                    • Deep engraving
                    • Precision threading
                    • Hybrid 510 connection
                    • Self-adjusting gold plated battery contact

                    If you are new to vaping and do not have a clear understanding and comprehension of Ohms Law and battery safety, this is not the device for you. 
                    This is an unregulated, mechanical device. Improper use, or build on this device can cause serious bodily harm. Never use batteries that are torn, nicked or dented with this device. 
                    The Vape Shop will not claim liability for any results of improper use. If you have any concerns, contact our support team for more information on mechanical devices.

                    More Details →

                    CUSTOMER REVIEWS

                    Based on 1 review Write a review
                    Sold Out

                    Geekvape Karma Kit

                    $83.95

                    Or 4x interest free payments of $20.99 NZD

                    Brand Geekvape

                    This product is unavailable

                    The Geekvape Karma Kit is an ultimate mechanical mod kit consisting of a polished copper mechanical mod and two (RDTA/RDA) atomisers in one. 
                    • Combination of RDTA and RDA (interchangeable)
                    • Adjustable side airflow control system
                    • Velocity style deck, large post holes to fit larger coils
                    • Large side e-juice fill port for a more convenient access
                    • All in one kit
                    • High grade copper
                    • Direct-to-battery 510 connection
                    • Heat-resistant wide bore drip tip
                    Specifications
                    Mod: 25mm x 84mm
                    RDTA: 25mm x 46mm
                    RDTA: 5ml tank reservoir

                    RDA: 25mm x 30.5mm
                    RDA: 2ml juice well

                    In The Box
                    1x Copper and black mechanical mod
                    1x Karma RDTA/RDA tank
                    1x Spare glass tube
                    1x User manual
                    Spare parts

                    If you are new to vaping and do not have a clear understanding and comprehension of Ohms Law and battery safety, this is not the device for you. 
                    This is an unregulated, mechanical device. Improper use, or build on this device can cause serious bodily harm. Never use batteries that are torn, nicked or dented with this device. 
                    The Vape Shop will not claim liability for any results of improper use. If you have any concerns, contact our support team for more information on mechanical devices.

                    More Details →