First to stock in NZ, The Vape Shop is proud to introduce the Lost Vape Triade DNA250C. An ultimate representation of Evolv's latest DNA250C chipset, a modern and futuristic edition of the triple 18650 structural architecture with close attention to details in designs and craftsmanship.

The chassis features similar aesthetics to its predecessor, the luxurious carbon fibre wrapped battery bay provides a streamlined and universally elegant design, while clean angles and faces tie the aesthetic look together. Precision milled stainless steel buttons retain the highly responsive and smooth feel, while adding ventilation stripes for a perfect statement piece.

The Triade DNA250C integrates Evolv's most powerful DNA250 colour chipset that implements a host of innovative functionality - replay function, boost mode, wattage control, temperature protection, preheat and an onboard programmable multi-colour LED.

Powered by triple 18650 batteries, the Triade can fire up to a staggering 300W. Fully upgraded in performance while retaining the pinnacle of designs in reconfigurable devices, the Lost Vape Triade DNA250C is the ultimate flagship output technology.

Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of three. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries.

• DNA250C Chipset
  • Official Evolv Chipset
  • 1 to 300W Output
  • Boost Mode
    • Increases Initial Power Output and Ramp-Up Time
  • Escribe Compatible
• Temperature Control Suite
  • Ni200 Nickel Support
  • Titanium Support
  • Stainless Steel Support
  • Additional Settings Configured Through Escribe
  • 200 to 600 Degrees Fahrenheit
• Triple 18650 Platform
  • Gold Plated Spring Loaded Contacts
  • Batteries Sold Separately
• Carbon Fibre Panels
• Four Button Control Face
  • Oversized Firing and Adjustment Buttons
  • Rectangular Adjustment Buttons
• 0.9 Inch Full Color TFT Screen
• Displays Essential Data Neatly
  • Check Atomiser
  • Shorted
  • Weak Battery
  • Check Battery
  • Temperature Protected
  • Ohms Too High/Too Low
  • Too Hot
• Adjustable via Escribe
• Replay Function
  • Capture the Perfect Puff
  • Select or Tune Preferred Temp Control
    • Nickel 200
    • SS
    • Titanium
  • Temp-Sensing Coils
    • Mix and Match Different Coils
      • Example. Ti Wrapped with SS
  • Combinations of None Temp Coils and Temp Coils
    • Example. Kanthal Wrapped with Ti
• Escribe Companion Software
• Configure and Modify the operation of the DNA250C
• Escribe Download Link
• Escribe Interactive Training Course
• Micro USB Port
  • 2A Charging
  • Firmware and Software Upgrade
• USB On-The-Go
  • Triade DNA250C Acts as a Power Bank
• Stainless Steel 510 Thread Point
  • Nickel Plated Brass 510 Contact

DNA250C Features

• 1 to 300W Output Range
• .2 to 10.0V Output
• 0.1 to 2.0Ω Kanthal Resistance Range
• 0.08 to 1.0Ω Temperature Sensing Range
• Temperature Range
  • 200 to 600 Degrees Fahrenheit
• Cell by Cell Monitoring
• Cell Balancer
  • 2A USB Charger
• Atomiser, Weak Battery, Temperature, Resistance, Auto Power Down, and Heat Protection
• Escribe
  • Configure and Modify the operation of the DNA250C
  • Escribe Download Link
  • Escribe Interactive Training Course
• Autosensing Temperature Resistance
• Lock Mode
• Stealth Mode
• Power Lock Mode
• Power Preset Mode
• Resistance Lock
• Max Temperature Adjustment
• Efficiency
  • 98%
• Screen On Current
  • 21mA
• Quiescent Current
  • 3.5mA
• Power Down Current
  • 5uA

1x Lost Vape Triade 250C Box Mod
1x User Manual
1x USB Cable
1x Male to Female USB Cable

Vaporesso's latest sub-ohm tank is now available in NZ! Featuring a whopping 7mL juice capacity, the Cascade tank is one of the premier tanks on the market with its stylish and functional design, and the power to back it up.

Eliminate dry hits with the Cascade's Isolation Structure Design! This innovative new feature separates the juice from the coil chamber allowing for more consistent flavour and reducing dry hit potential. Just top up up the tank once the liquid falls below glass level and say goodbye to nasty dry hits, and hello to smooth, flavoursome clouds!

Included with the tank is a GT Core adapter, allowing you to utilise your favourite Vaporesso GT coils; or for users requiring more power - the GTM 8 coil included in the pack is capable of running at a staggering 200W!

Simplicity and ease of use is achieved by a slide to fill top full system, large wicking ports, and plug-pull style coils.

Specifications

• Dimensions: 25x60.5mm
• Weight: 81g
• Material: Stainless Steel
• Capacity: 7mL
• Thread: 510
• Triple Adjustable Bottom Airflow
  • 11mm by 3mm Each Airslot
  • Fully Closeable
• 11mm Bore Delrin Drip Tip
• Heating Insulation Layer

In The Box

• 1x Cascade Sub-Ohm Tank
• 1x GTM 2 Coil 0.4 ohm
• 1x GTM 8 Coil 0.15 ohm
• 1x GT Core Adapter
• Spare Glass and O-Rings
• User Manual

Desire Designs collaboration with OhmBoyOC, the Rage 155W Squonk mod has arrived at The Vape Shop NZ. A dual 18650 powered squonk box mod with a maximum output of 155W, sophisticated and classy design, temperature control suite, and a quarter turn and pull 7mL squonk bottle.

The Rage Squonk has a three button design with an intuitive mounted display screen that displays the essential factors that vapers need to see. A solid stainless steel 510 connector with spring loaded gold plated center squonk pin for optimal conductivity. Supporting Nickel, SS316, Titanium, and Bypass mode

The high amperage 18650 batteries are housed through the magnetic battery door of the Rage Squonk, the 7ml squonk bottle is housed on the front of the device and can be removed by a small notch, atop the squonk bottle features a knurled threaded cap.

The Ohm Boy X Desire Rage Squonk 155W is a phenomenal device to pick up for the pure power and the aesthetically pleasing look and feel.

Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries. 

• 5 to 155W Output Range
  • 0.08 to 3Ω Atomiser Range
  • 40A Max Output Range
• Temperature Control Suite
  • Ni200 Nickel Support
  • Titanium Support
  • SS316 Support
  • Bypass Support
  • 200 to 600 degree Fahrenheit Range
• 0.69 inch Mounted OLED Screen
  • Diagonal Arrangement
  • Output Temperature
  • Output Wattage
  • Output Voltage
  • Material and Mode Selection
  • Atomiser Resistance
  • Output Current
  • Battery Life Indicator
  • Screen Flip
• 7mL Squonk Bottle
  • Quarter Turn Pull
  • Knurled Top
• Three Button Control Face
  
  • Oversized Firing Button
• Magnetic Battery Door
  • Accepts Dual High Amperage 18650
    • Batteries Sold Separately
  • USB Port
    • Update
    • Charge up to 1A
• Stainless Steel Plated 510 Threading and Firing Pin
  • Spring Loaded Gold Plated Center Pin
• Short Circuit Protection/ Over Charging Protection/ Auto Lock Protection/ Low Voltage Protection/ Over Vaping Protection

1x Micro USB Cable
1x Manual and Warranty Card

The world's most popular mech tube is now available in New Zealand!

Bend tricks and chuck clouds with the VGOD Mech Pro 2 Kit. This kit is made for serious vapers! Featuring a copper chassis, CNC machined delrin comfort grips, and VGOD's own TriCon switch - the Mech Pro 2 offers the best in comfort, quality, and performance. 

This kit includes both the VGOD Mech Pro 2 tube and the VGOD Elite RDA.

VGOD Mech Tube

• Unique CNC machined removable Delrin comfort sleeves.
• TriCon switch comes with three independent pins increase surface contact with battery.
• Carbon fibre switch with built-in self-adjusting battery ring to lock battery in place.
• Comes with Elite RDA, 2mL juice well, dual post build deck.
• Portable case included for convenient carrying and storage.
• Dimension: 24 x 85.2mm
• Material: Billet Copper/Stainless Steel/Gold.
• Cell Type: Single high-drain 18650 cell (sold separately)
• Thread: 510 hybrid thread.

Elite RDA

• Height: 33mm
• Outside Diameter: 24mm
• Thread: 510 thread
• Juice Well: 9.25mm in depth
• Liquid Capacity: 2mL

In The Box

• 1x VGOD PRO Mech 2 Mod
• 1x VGOD Elite RDA
• 1x VGOD Carry Case
• 1x Manual
• 1x Accessories Pack

If you are new to vaping and do not have a clear understanding and comprehension of Ohms Law and battery safety, this is not the device for you. 
This is an unregulated, mechanical device. Improper use, or build on this device can cause serious bodily harm. Never use batteries that are torn, nicked or dented with this device. 
The Vape Shop will not claim liability for any results of improper use. If you have any concerns, contact our support team for more information on mechanical devices.

New to NZ, VGOD introduces the Pro 200W Kit - a quality and performance regulated output device that delivers the perfect combination of power, style and comfort along with the VGOD Pro Subtank.

Escape to a world of style and function. It is designed for extreme versatility to give you everything you need in one box. The Pro 200 Kit along with the Subohm tank is equipped for high performance and intensified flavour. Built to withstand your active lifestyle and always look good doing it.

The Pro features an elegant matte black finish followed by a zinc alloy body with brushed stainless steel and rubberised grips. The dual 18650 batteries (sold separately) are housed with a side panel door and features a rapid micro USB charging dock.

Proprietary ATOM.V.200B chipset technology, a temperature control suite, a MECH mode that builds as low as 0.7Ω, 20 memory banks, and a Power Curve Mode provide exceptional output control. The device has a 0.96 inch coloured OLED Screen that displays various types of information and can be customised by the users.

A three button control face is utilised with the trigger being behind the atomiser. Along with the VGOD Elite 200W TC Box mod is the Elite Subtank, a 24mm sub-ohm tank with a 3ml capacity of e-liquid.

The Elite Subtank utilises the Shotgun Coil head which comes in 0.2Ω, rated at 30 to 100W and recommended at 60W. The Elite Subtank is top fill and can accommodate up to 3mL of e-liquid. With its modern design and smooth, comfortable feel, the VGOD Pro 200 Kit is a great choice for those who dare to rise above.

Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries.

• 7 to 200W Output Range
  • 0.08 to 3.0Ω Atomiser Resistance Range
  • Proprietary ATOM.V.200B Chip technology
• Temperature Control Suite
  • Ni200 Nickel Support
  • Titanium Support
  • Stainless Steel 316 and 304 Support
  • MECH mode
  • Resistance Lock
  • Pro Mode
    • Up to 7 Seconds Adjustable Wattage in 1 Second Intervals
  • Memory Mode
    • Up to 20 Memory Can Be Stored
  • 200 to 600 degree Fahrenheit Range
  • 0.07 to 3.0Ω Atomiser Resistance Range
• New Power Curve Mode for Exceptional Output Control
• 0.98 inch Side Mounted Colored OLED Screen
• Vertical Arrangement
• Output Temperature
• Output Wattage
• Output Voltage
• Material and Mode Selection
• Atomiser Resistance
• Output Current
• Dual Battery Life Indicator
• Adjustment Lock
• Three Button Control Face
  • Oversized Firing Button
• Slide On Battery Bay
  • Accepts Two High Amperage 18650 Batteries
    • Batteries Sold Separately
  • Micro USB Charging Port
• 24K Gold Plated 510 Threading and Firing Pin
  • Spring Loaded Gold Plated Contact

VGOD Pro 200 Dimensions

• 85mm x 27mm x 57mm

VGOD Pro Subtank Features

• 24mm Diameter Base
• Hinge and Lock Top Fill System
  • Swivels Open and Shut
  • Dual Fill Port
• 3ml Max Standard Capacity
• Shotgun Coil Family
  • 0.2 ohm
  • 30 to 100W
  • 60W Recommended Range
• Dual Adjustable Airslots
• Stainless Steel and Glass Construction

One VGOD Pro Subtank
One 0.2 ohm Shotgun Coil
One Spare Glass
One User Manual

The Tesla Invader IV 280W Kit has arrived at The Vape Shop NZ. With the massive success of its predecessor, Teslacigs have released their new, lighter VV Tesla Invader IV with Invader IV RDA. Now compatible with dual 21700, 20700 or 18650 batteries, essentially improving the potential battery life, while retaining the same performance of high drain 18650s. 

The Invader series are an incredibly durable range of mods that are built to last. With more range of power on the 5 step potentiometer and increased resistance range, the Invader IV is able to run between 3-8 volts and down to 0.08Ω.

The highly anticipated Tesla Invader IV is one of the most reliable, hard hitting mods on the market. While the Invader IV hits like a series mechanical mod, it still has the safety features of a standard regulated mod without all the bells and whistles getting in your way. Plus the innovative Invader 4 RDA which features convenient dual coils build deck, adjustable bottom airflow system and Resin wide bore drip tip, the Teslacig Invader IV Kit is definitely an excellent vape device.

With incredible efficiency and no nonsense design, the Tesla Invader IV is the perfect choice for people who want unadulterated power and ease of use. The Invader IV has a maximum power output of 280W. The Invader IV also supports USB input charging, so you don't need to rely on an external charger to charge your batteries.

We advise a thorough understanding of ohm’s law for using this variable voltage device. You will need to calculate the correct voltage to achieve the wattage level that your coil/s require.

Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries. 

• Dimension: 92 x 60 x 28mm
• Material:  Aluminium alloy
• RDA Dimensions: 25 x 34mm
• Dual post build deck
• Cell Type: Two high-drain 18650/20700/21700 cells
• Batteries Sold Seperately
• Maximum Output Wattage: 280W
• Voltage Adjust: I-V level
• Output Voltage Range: 3-8V
• Maximum Output Current: 53A
• Resistance Range: 0.08ohm-3.0ohm
• Input Voltage Range: 6.4V-8.4V
• Standby Current: <50uA 
• USB: 5V/1.5A
• LED Indicator: Blue-Green-Red
• Protections: Over puffing protection, reverse connection protection, atomizer short-circuit protection, low voltage alert, overheat protection, over-current protection 
• Thread: 510

In The Box

The Tesla Invader IV 280W Mod has arrived at The Vape Shop NZ. With the massive success of its predecessor, TeslaCigs have released their new, lighter VV Tesla Invader IV. Now compatible with dual 21700, 20700 or 18650 batteries, essentially improving the potential battery life, while retaining the same performance of high drain 18650s. 

The Invader series are an incredibly durable range of mods that are built to last. With more range of power on the 5 step potentiometer and increased resistance range, the Invader IV is able to run between 3-8 volts and down to 0.08Ω.

The highly anticipated Tesla Invader IV is one of the most reliable, hard hitting mods on the market. While the Invader IV hits like a series mechanical mod, it still has the safety features of a standard regulated mod without all the bells and whistles getting in your way. 

With incredible efficiency and no nonsense design, the Tesla Invader IV is the perfect choice for people who want unadulterated power and ease of use. The  The Invader IV has a maximum power output of 280W, and fires down to a super low 0.08ohm. The Invader IV also supports USB input charging, so you don't need to rely on an external charger to charge your batteries.

We advise a thorough understanding of ohm’s law for using this variable voltage device. You will need to calculate the correct voltage to achieve the wattage level that your coil/s require.

• Dimension: 92 x 60 x 28mm
• Material:  Aluminium alloy
• Cell Type: Two high-drain 18650/20700/21700 cells
• Maximum Output Wattage: 280W
• Voltage Adjust: I-V level
• Output Voltage Range: 3-8V
• Maximum Output Current: 53A
• Resistance Range: 0.08ohm-3.0ohm
• Input Voltage Range: 6.4V-8.4V
• Standby Current: <50uA 
• USB: 5V/1.5A
• LED Indicator: Blue-Green-Red
• Protections: Over puffing protection, reverse connection protection, atomizer short-circuit protection, low voltage alert, overheat protection, over-current protection 
• Thread: 510

In The Box

• 1x Invader IV Mod
• 1x USB Cable
• 2x 18650 Adapters 
• 1x Information Card

The Innokin Proton mod has just arrived to The Vape Shop NZ. The Proton is a 235 watt high-performance box mod with a first of its kind joystick style selector and 1.45” TFT colour screen display which supports 6 colours.

Unlike anything you’ve seen from Innokin, every component, texture, and material of Proton underwent a complete design overhaul to bring you not only the high quality you expect from Innokin but the innovation factor that stems from its namesake as well. 

In short, the Proton is all about customisation and user experience. It’s quality made affordable.

• 6 to 235W Wattage Output
  • 0.05 to 3.5Ω Atomiser Resistance Range
• Temperature Control Suite
  • Ni200 Nickel Support
  • Titanium Support
  • Stainless Steel Support
  • Curve Support
  • TCR Support
  • Bypass Support
  • 300 to 600 Degrees Fahrenheit Output Range
• 1.45" TFT Screen Display
  • Output Wattage or Temperature
• Output Timer
• Output Voltage
• Mode and Heating Element
• Individual Battery Life Indicator
• Atomiser Resistance
• Lock Indicator
• Puff Counter
• Six Menu RGB Customisation
  • Blue
  • Red
  • Green
  • Pink
  • Purple
  • White
• Dual Control Interface
  • Oversized Grip Style Fire Button
  • Analog Control Adjustment Interface
• Slide to Open Bottom Latch Battery Access Door
  
  • Accepts Two High Amperage 18650 Batteries
    
    • Sold Separately
  • Micro USB Charging
    • 5V/2A
• Stainless Steel 510 Threading
• 24K Gold Plated Spring Loaded 510 Connection

Proton Mod Dimensions

• 85mm by 44.6mm by 29.6mm

Now available in NZ, The HellVape Drop Dead RDA is a collaboration between Vapin' Heathen and The Vapor Chronicles, a rebuildable masterpiece based on the designs of the Dead Rabbit and Drop RDA.

Constructed of stainless steel and machined to a high precision, the Drop Dead RDA provides all the features HellVape are renowned for. Sharing the same style build deck as the original Drop RDA with a deep juice well and gold plated posts, whether single or dual coil builds - installing your coils an absolute breeze.

The Drop Dead has side airflow, but in order to minimise leakage the airflow holes have been moved right up to the top, with air channels that pull the airflow down diagonally. Included are two 810 style goon drip tips, it's also compatible with 510 drip tips when used with the included 510 drip tip adapter and the kit comes with a bottom feeding centre pin for use with squonkers.

The Drop Dead RDA is the perfect balance of flavour and vapour production.  

• 24mm Diameter
• Deep Juice Well
• Superior Stainless Steel Construction
• Four Post Build Deck Design
• Side-Secured via Slotted Flathead Screws
• Gold-Plated Positive Posts
• PEEK Insulated Block
• Single or Dual Coil Configurations
• Dual Side Airflow Control - Multi-Slots Design
• 810 Resin Widebore Drip Tip
• 810 Acrylic Widebore Drip Tip
• 510 Drip Tip Adapter
• Squonk-Ready Bottom-Feeding 510 Pin 
• Gold-Plated 510 Contact Pin

In The Box
1x Drop Dead RDA
1x 810 Resin Widebore Drip Tip
1x 810 Clear Widebore Drip Tip
1x 510 Drip Tip Adapter
1x Squonk BF 510 Pin
1x Phillips Screwdriver
1x Flathead Screwdriver
1x Allen Key
1x Spare Parts Bag
1x Instructional Manual

The Uwell Whirl 22 follows the philosophy of a simple one button design built within a portable pen-style device. The Whirl 22 is the larger and higher capacity version of the slimmer Uwell Whirl 20 kit, with a larger 22mm diameter, an expanded 1600mAh built-in battery and a 2.0ml e-liquid capacity with top fill design.

The Whirl 22 features a quartz glass tank with a metal sleeve design, utilises NiChrome 0.6Ω atomiser heads that have been optimised for flavor and vapour production. A five airflow hole design can be adjusted to your personal preferences.

Purchase replacement coils here: UWELL Whirl Coil Pack

• All In One Design
• Diameter: 22mm, Height 117mm
• Built-in 1600mAh Battery
• Max Wattage: 25W
• Voltage Range: 3.0 - 3.8V
• E-Liquid Capacity: 2.0ml
• Bottom Fill Design
• Plug and Pull Atomiser Head Replacement Design
• Simple One Button Design
• Battery Life Indicator Light
• Glass Tank With Metal Sleeve
• Stainless Steel Construction
• Quartz Glass
• Bottom Adjustable Airflow Control Valve
• Includes (2) Whirl NiChrome 0.6ohm Coil Atomiser Heads
• Bottom Micro USB Charging Port
• 510 Drip Tip Compatible
• Resistance Range: 0.6 ± 0.1Ω
• Offers MTL Vape & DTL Vape
• Top Fill

1x WHIRL 22 kit (exclude coil)
1x Extra quartz glass
2x 0.6 ohm coils
1x Pack of replacement O-rings
1x Micro-USB cable
1x User Manual
1x Drip tip cover (covers and protects tip when not in use)

The Vape Shop is first to bring the latest tech in pod systems from Suorin to New Zealand!

The Suorin iShare Ultra Portable System Starter Kit is a robust and versatile ultra portable pod system that features an intuitive on-the-go battery bank that holds two Suorin iShare Single devices to utilise your favourite salt based nicotine e-liquids anywhere you want without worrying about battery life.

Much like the Suorin Air or the Suorin Drop Ultra Portable System, the iShare Single is an all in one device with draw activated firing, a magnetic pod system that can hold up to 0.9mL of e-liquid, an atomiser resistance of 1.8Ω and a maximum of 9W output. A 130mAh built in battery powers the device while the battery bank holds 1400mAh. The Suorin iShare Ultra Portable System is a simple and convenient all-in-one, ultra portable system that is perfect for users looking for a sleek and all-day vaping device!

• All in One System
  • Draw Activated Firing
  • 9W Maximum Output
• Refillable Suorin Pod System
  • 0.9mL Capacity
  • 1.8Ω Atomiser Resistance
  • Proprietary Connection
• Plug and Play Connection
  • Gold Plated Proprietary Connection
  • Pod Acts as Tip
• 130mAh Built In Battery
  • LED Battery Life Indicator
  • iShare Battery Bank Required to Charge

iShare Battery Product Features

• 1400mAh Battery Capacity
• Holds Two iShare
  • Magnetic Connection

The Zenith 3 is the latest dual 20700 battery semi-mechanical box mod to land in NZ. Presenting with a unique easy to grip shape with hard lines and gorgeous colour accents, it features a voltage adjustable knob with 16 voltage levels from 2.4V-6.9V.

The Zenith 3 box mod’s chipset is designed by IWEPAL and features short circuit protection, low power protection, reverse battery protection and has milliseconds fire speed with a maximum output of 300W and 50A discharge.

The device is simple to operate, no overhang with large atomisers, supports USB charging, and is compatible with 20700 batteries for longer life. An 18650 battery adapter is included. 

• Max Wattage: 300W
• Size: 92*49*34.5mm 
• Dual 20700 batteries mod with long battery life
• Semi-mechanical High power Box Mod
• 360 degree Adjustable Voltage Knob
• 16 voltage levels to adjust from 2.4-6.9V
• Screenless Design - Efficient Battery Use
• Various protection
• Large side fire button
• Resistance Range: 0.05~3.0 ohm
• USB port charging support

The Zenith 3 is the latest dual 20700 battery semi-mechanical kit to land in NZ. Presenting with a unique easy to grip shape with hard lines and gorgeous colour accents, it features a voltage adjustable knob with 16 voltage levels from 2.4V-6.9V.

The Zenith 3 box mod’s chipset is designed by IWEPAL and features short circuit protection, low power protection, reverse battery protection and has milliseconds fire speed with a maximum output of 300W and 50A discharge.

The device is simple to operate, no overhang with large atomisers, supports USB charging, and is compatible with 20700 batteries for longer life. An 18650 battery adapter is included. 

The iJoy Diamond sub-ohm tank is included in this kit - measuring in at 26.5mm diameter and holding up to 5.5mL of eliquid using the bulb glass, or 4mL with the standard glass. The Diamond tank utilises iJoy's newest mesh coils rated for vaping from 40 to 90W and providing an increase in flavour and cloud production.

Purchase replacement coils here iJoy Diamond DM Replacement Coils

• Max Wattage: 300W
• Size: 92*49*34.5mm 
• Dual 20700 batteries mod with long battery life
• Semi-mechanical High power Box Mod
• 360 degree Adjustable Voltage Knob
• 16 voltage levels to adjust from 2.4-6.9V
• Screenless Design - Efficient Battery Use
• Various protection
• Large side fire button
• Resistance Range: 0.05~3.0 ohm
• USB port charging support

The Drop Solo designed by The Vapor Chronicles is the latest game changing single coil RDA to hit NZ. A 22mm single coil version of the original 24mm Drop RDA - widely regarded as one of the best RDAs in the industry.

Featuring two large post holes which allow for easy coil placement and maximum build space with open access to trim excess wire, the post holes have also been designed with a notch to trap round wire builds with ease.

Stepped airflow design provides precise control while maintaining an ultra smooth, flavoursome, and whistle-free experience. A deep and levelled juice well allows for convenient dripping or squonking while minimising possibilities of leakage.

Two different caps are included in the box - the stainless steel cap provides more space and increased airflow, and maintains the original Drop RDA aesthetic, while the transparent cap will satisfy those who want a lower profile and reduced chamber benefits. A 24mm decorative base ring is included to create a seamless design with larger devices.

1x Drop Solo RDA
2x 0.35Ω Coils
1x Bottom Feed Positive Pin
1x PMMA Mid Cap
1x PMMA Top Cap
1x PMMA 24mm Accessories
1x Drip Tip
1x 510 Drip Tip Adapter
1x Spare Parts Pack
1x Allen Key
User Manual

dotMod's latest tank, the dotMod dotTank 24mm has arrived in NZ.

Design
dotMod has taken the best designs from their standard tank and improved on them. Featuring a 3.5mL juice capacity and an elegant texture to the outside rings of the tank for added convenience when using. They’ve made sure this tank will stand out.

Get In The Groove
Featuring solid brass construction that is beautifully 24K gold plated, and all new dotCoils that now utilise a single mesh coil design for exceptional flavour and performance, you will be able to vape longer and enjoy enhanced flavour.

In The Box
1x dotTank 24mm 3.5ml
2x dotCoils
2x Drip Tips (Black and Ultem)
4x O-rings
1x glass cover
1x proof of authenticity