Wismec Reuleaux RX2/3

$94.95

Brand Wismec

Reuleaux RX2/3, an updated version of Reuleaux series, designed by JayBo, features a replaceable back cover for two or three cells with power output of 150w or 200w respectively. Powerful yet intelligent with variable temperature control function and upgradeable firmware, custom logos and additional protective cases, the Reauleaux RX2/3 is outstanding mod in all areas.

Silicon cases: Wismec Reauleaux RX2/3 Silicon Case

Firmware v4.13 update
Maximum output power upgraded to 250W, custom logo and preheat function available.

Specifications

Size: 40.2*34.5*88.7mm (for 2 cells)
Size: 40.2*50.1*88.7mm (for 3 cells)
Thread Type: 510 spring loaded thread
Cell type: High-rate 18650 cell
Cell type: (discharging current should be above 25A)
Output mode: VW/TC-Ni/TC-Ti/TC-SS/TCR Mode
Output wattage: 1-150W (for 2 cells)/1-200W (for 3 cells)
Resistance range: 0.05-1.5ohm for TC modes
Resistance range:0.1-3.5ohm for VW mode
Temperature range: 100-315¬įC/ 200-600¬įF (TC modes)

In the box

1x Reuleaux RX2/3
1x Back cover
1x USB cable
1x User manual

More Details →

eLeaf iCare

$22.50

Brand Eleaf

The Eleaf iCare all in one vape kit is a real game changer at an exceptionally low price point, one of the lowest cost complete vape devices in New Zealand.

It's a tiny and compact e-cigarette starter kit with an internal tank and one of the few to have an adjustable airflow system. Intuitive and simple to use, with an automatic On/Off feature that initiates when vaping and the tank can be refilled from the top with ease. By using a higher strength e-liquid, the iCare perfectly recreates the sensation you are accustomed to and with intuitive three colour LEDs, you can easily check the battery status by a simple glance at the colour of the light. A great device for experienced vapers and anyone looking to quit smoking in NZ alike.

Features

  • All In One system
  • Draw activated firing
  • Integrated 650mAh rechargeable battery
  • Micro USB charged
  • 1.8ml tank¬†capacity
  • Top filled
  • iCare IC 1.1 ohm coil
  • 5w to 15w output
  • Adjustable airflow
  • Incredibly compact profile at 30mm x 14mm x 75mm
  • Multi use top cap that acts as drip tip
  • Integrated coil slot tool
  • Three color LED feedback
    • Green - 100 to 16% battery state
    • Yellow - 15 to 6% battery state
    • Red - less Than 5% battery state

In the box
1x Eleaf iCare
2x 1.1ohm IC coils
1x Micro USB charging cable
1x User manual

Additional replacement coils

Link: Eleaf iCare IC Replacement Coil Pack

More Details →

Joyetech eGo AIO Starter Vape Kit

$38.95

Brand Joyetech

We consider this to be the best starter kit currently available. It provides great flavour and satisfying cloud production. All from a simple, tiny, pocket friendly device.

One of the few entry level vapes to feature adjustable airflow and the first tank to feature a child safe top filling system.  Airflow through the top means it will never leak, and the all in one tank and battery system makes this the smallest 1500mAh setup of its kind. Targeted towards those who are just coming off of cigarettes, however this little pocket rocket really punches above it weight.

If you would like to add a discounted bottle/s of one of the Rocket Sheep Juice Co. range, please leave an order note letting us know what nicotine level and flavour.

Features

  • All in one unit with tank and battery
  • E-liquid illumination LED with 7 changeable colours
  • 2ml e-liquid Capacity
  • 1500mAh battery capacity
  • Innovative leakage proof technology
  • Childproof tank lock system
  • Charges via micro USB
  • Size: 19mm (D) x118mm (L)
Coils

Link: Joyetech eGo AIO BF Replacement Coils

In the box
1x Joyetech eGo AIO
2x BF SS316 0.6ohm coil heads
1x Plastic spiral mouthpiece
1x Clear mouthpiece
1x USB cable
1x Quick start manual
More Details →

Eleaf iStick Pico

$53.95

Brand Eleaf

The iStick Pico is an innovative and compact mod that you can hold in the palm of your hand. Powered by a single interchangeable 18650 cell, the iStick Pico provides up to a maximum of 75 watts output and features switchable VW/Bypass/TC-Ni/TC-Ti/TCR modes.

Requires 1x 18650 battery. We recommend the: Samsung 25R5, Sony VTC5

Specifications

  • Size: 45mm x 23mm x 70.5mm
  • Cell type: high discharge 18650 cell
  • Cell type: Maximum continuous discharge current should be above 25A
  • Output modes: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
  • Output wattage: 1-75W
  • Resistance range: 0.05-1.5ohm (TC modes)
  • Resistance range: 0.1-3.5ohm (VW/Bypass mode)
  • Temperature range: 100Ôľć315‚ĄÉ/200Ôľć600‚ĄČ (TC modes)

Features

  • Extremely compact and light weight
  • Powered by a single high drain 18650 battery (not included)
  • Micro USB charging (included)
  • Firmware upgradeable
  • Three customisable TCR settings for advanced users
 
In the box

1x Eleaf iStick Pico mod
1x USB cable
Instruction manual  

Operation Guide

Power on and off: Install a high-rate 18650 battery (discharge current above 25A); press fire button 5 times continuously to turn on/off the device.

Vaping: Long press the fire button and take a puff.

Stealth function: While the device is on, simultaneously hold the fire button and the down button. This will allow you to switch between the Stealth on and off function.

Lock/unlock: While the device is on, simultaneously keep pressing up and down buttons for 2 seconds. This will allow to switch between lock and unlock.

Switch the display Mode: While the device is powered off, keep pressing up and down buttons simultaneously for 2 seconds, the display will rotate 180 degrees.

Shift between VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR mode: While the device is on, press the fire button 3 times in quick succession, the first row will flash to indicate you entering the menu. Press the up or down button to switch between different modes. Then press the fire button one time to confirm the mode you chose

More Details →

Kanger TOPBOX Mini 75w TC Kit

$109.95

Brand Kangertech

The KangerTech TOPBOX Kit supersedes the SUBOX Kit. With a new top filling tank for convenience and three additional coils to decide which best suits the way you like to vape. Kanger's Universal-TC technology supports all Ni/Ti/ SS/NiCr wires for temperature control.

Requires 1x 18650 high-drain battery. We recommend: Samsung 25R5, Sony VTC5

This kit does not include any vapour liquid.

Features:

  • Top filling!
  • 7-75W
  • Temperature control
  • Supports atomisers over 0.1 Ohm
  • Spring loaded 510 Pin
  • Includes RBA Plus
  • Micro USB port for charging
  • Display screen
  • Magnetic battery cover for easy battery access
  • 10 second cut off safety feature
  • Short circuit protection
  • Open circuit protection
  • Low battery warning
What's in the box:
  • 1x TOPTANK Mini 4ml
  • 1x KBOX Mini TC 75W
  • 1x 0.15ohm Ni200 coil
  • 1x 0.5ohm Clapton coil
  • 1x 0.5ohm SSOCC coil
  • 1x RBA Mini Plus
  • 1x RBA accessory pack
  • 1x Micro USB
  • 1x Authenticity code using guide
  • 1x Manual
Specifications
Size: 82x39x22mm
Spring-loaded 510 contact pin
Wattage output: 7-75W
Temperature control : Ni / Ti / SS / Ni-chrome
Temperature control range: 100 - 300C / 200 - 600F
Minimum Resistance: 0.1 ohm
Requires (1) high amp 18650 battery

TOPTANK Mini
Size: 22(D)x64(L) mm
Capacity: 4ml
Filling e-Juice: top filling

How to use
1. Press the fire button 5 times in quick succession to turn the device on/off.
2. After switch on, OLED display "Kanger Tech" at stand by mode.

3. Press "+", "-" to adjust the output wattage.
4. OLED screen will display the attached atomiser resistance value, voltage, wattage and remaining battery level.
5. Plug in the USB cable to charge. OLED display charging state.

More Details →
Sold Out

SMOK Alien w/ TFV8 Baby Kit // 220w

$138.00

Brand SMOK

This product is unavailable

The Alien 220w is the latest high wattage mod from SMOK with a maximum power output of 220 watts. Accurate temperature control in Nickle 200, Stainless Steel and Titanium along with TCR function. The huge screen provide loads of information and live readings of amps, volts, battery and internal temperature. The Alien 220w also supports balance charging and is firmware upgradable.

The TFV8 Baby tank or Baby Beast delivers massive vapour production and stunning flavour in a small compact tank.

For batteries we recommend: Samsung 25R5, Sony VTC5

Alien 220

  • 220 watts
  • VW/TC function (SS,Ti, Ni200, TCR)
  • Firmware upgradeable
  • Huge bright LCD screen
  • Balance charging
  • Small compact size
  • Requires 2x high drain 18650 batteries (not included)¬†
TFV8 Baby Beast Tank
  • 3ml mini size
  • Redesigned bottom pair air slots, air chamber and drip tip
  • Adjustable airflow system
  • Top refill system

Alien 220 specifications
Size: 85 x 44 x 28.4mm
Power range: 1W-220W
Resistance range: 0.1ő©-3ő© (VW) / 0.06ő©-2ő© (TC)
Temperature range: 200‚ĄČ--600‚ĄČ/100‚ĄÉ--315‚ĄÉ

Baby TFV8 specifications

Size: 22x53mm
Capacity: 3ml

In the box
1x Alien 220 Mod
1x TFV8 Baby Tank
1x V8 Baby-Q2 Core (0.4ő© dual coils) (pre-installed)
1x V8 Baby-T8 Core (0.15ő© octuple coils)
1x USB cable for charging or upgrading
1x Replacement glass tube
1x User manual
Spare parts

More Details →

Kanger TOPTANK Mini // 4ml

$39.99

Brand Kangertech

The TOPTANK Mini is the latest top fill tank from Kanger that supersedes the Subtank Mini.
  • Capacity: 4ml
  • Size: 22 (D) x 45 (L) mm
  • Material: Pyrex Glass And SS

In the box:

1x TOPTANK Mini
1x SSOCC 0.5ohm
1x SSOCC 0.15ohm
1x Mini RBA Plus
1x RBA accessory pack
1x Manual

More Details →
Sold Out

Kanger SUBOX Mini Kit - Black/White

$119.95

Brand Kangertech

This product is unavailable

The Kanger SUBOX Mini Kit is the #1 kit for new and veteran vapers alike. Extremely compact, superior performance and outstanding value - Kanger is pushing affordable vape technology forward in leaps and bounds.

Includes:

  • Kanger KBOX¬†Mini 50w Mod
  • Kanger Subtank Mini
  • 0.5ohm and 1.5ohm Vertical OCC¬†Heads
  • Subtank Mini RBA PLUS section

Requires 1x 18650 battery (not included). We recommend the Sony VTC5 18650 2600mAh 30A Continuous Discharge Battery that can be found here: Sony VTC5

 

 

More Details →

Samsung 25R5 18650 2500mAh 20A Battery

$9.60

Brand Samsung SDI

The green 25R5 version supersedes the previous blue 25R2 that was extremely popular in 2015. The electrolyte balance was tweaked giving this cell an excellent upgrade. Samsung has said the 25R5 does not have improved performance over the 25R2 but has a longer cycle life of more than 250 charge cycles.

100% Authentic Guarantee
We guarantee every 18650 battery is Grade A, 100% authentic and meets the advertised specs or your money back.

Specifications

  • ÔĽŅModel:¬†INR18650-25R5
  • Manufacturer:¬†Samsung
  • Chemistry: INR
  • ÔĽŅMax. continuous discharge current: 20A
  • Safe pulse discharge ratings: 95A < 0.5 sec, 65A < 1 sec, 40A < 5 sec, 30A < 6 sec
  • Nominal capacity: 2500 mAh
  • Nominal voltage: 3.6 V
  • Discharge end voltage: 2.5 V
  • Charging voltage: 4.20 +/- 0.05 V
  • Standard charging current: 1.25 A
  • Length: 65.85 mm
  • Diameter: 18.33 mm
  • Weight: 45.0 g
These are high capacity and high discharge current batteries. If mishandled/mistreated they can cause serious injury. Use at your own risk.

Safety Notes:

Do not short.
Do not leave unattended when charging.
Do not leave unattended immediately after charging.
Do not carry in your pocket or purse unless they are in a secure non-conductive carry case.
They are not toys. Do not let your children or pets play with them.
Do not recharge with cheap chargers that keep on trickle charging after the normal cycle or that do not follow the Constant Current / Constant Voltage (CC/CV) algorithm properly.

 

Shipping: Please note that due to aviation safety regulations lithium batteries cannot be sent via air freight.
Batteries sometimes have a small sticker attached. This is used for international shipping declarations by battery wholesalers and can be removed. Battery-specific model numbers are printed directly onto the plastic wrap by the manufacturer.
Rechargeable batteries, regardless of where they come from require responsible use. Incorrect handling can lead to damaged hardware or serious injury.
Before using any rechargeable battery make sure you understand the risks and take proper precautions. Never leave charging batteries unattended and always place the charging device on a stable fire-proof surface. Do not use any battery or battery charger that is damaged in any way whether that damage is visible or internal. Always transport batteries in a non-conductive container and ensure that batteries cannot come in contact with each other. Dispose of batteries in a safe and responsible manner. Contact your local council to find out what programs are in place to help you dispose of your batteries.
The Vape Shop will not be held responsible or liable for any injury, damage, or defect, whether permanent or temporary, that may be caused by the improper use of batteries.
More Details →
Sold Out

Vapor Shark rDNA DNA40

$248.00

Brand Vapor Shark

This product is unavailable

The rDNA DNA40 is the latest generation compact portable mod by Vapor Shark running Evolv's latest v5 gold chip with large screen. In addition to the outstanding attributes of previous versions, this version introduces some new and radically different features, never before seen in an electronic cigarette. This rDNA is the most powerful, yet also the most efficient version ever released; providing up to 40 watts of power while actively conserving battery life. Incredibly, this device is able to seamlessly transition between using coils wrapped with traditional resistance wire (Kanthal, Nichrome) as well as Nickel wire. The use of Nickel wire allows this device to monitor and limit the temperature of the coil, meaning an end to charred wicks (when properly configured) and opening a new realm of possibilities for coil building. The term most frequently used to describe this new technology is "game-changing"; and to say that this device will do anything less than completely revolutionise the way we vape, would be to understate the fact.


New features include:

  • Zip high speed charging
  • Larger screen
  • Reverse polarity buzzer
  • Powered by Evolv DNA40
  • 40 Watts of Power
  • LG 2500 mAh 35A 18650 battery
  • Gold plated, spring-loaded center pin
  • Integrated Wireless Charging, with available Micro-USB port
  • Matte black
  • Temperature sensing / limiting technology
  • 3.25" x 1.67" x 0.95"
  • Magnetic battery door and ejection ribbon
  • Reverse polarity protection
  • Supports 0.16 Ohms and higher
  • Four month manufacturer warranty
More Details →
Sold Out

Vapor Flask v2.1 DNA40

$419.00

Brand Vapor Flask

This product is unavailable

Designed and Manufactured in the United States, the Vapor Flask v2.1 DNA40 is precision machined from solid 6061 aluminium. Its ergonomic design fits comfortably in the hand and the aesthetics are second to none in it's class. These Flasks are running Evolv's new DNA40 gold v5 boards featuring the latest firmware with Celsius mode being available when using Ni200 wire.

  • 22mm profile
  • Stainless steel 510 connector
  • Spring loaded brass contact
  • Custom milled aluminium buttons
  • Micro USB with pass-through capability
  • Ergonomic design
  • Accepts 2x 18650 batteries
  • Top mounted LCD display

What's included: USB charging cable, protective pouch, manual

Switching to Celsius mode: From locked mode, holding down both the up and down buttons for two seconds will place the device in Max Temperature Adjust mode. Once this mode is entered, the max temperature will be displayed. The up and down buttons are used to adjust the max temperature. To switch from Fahrenheit mode to Celsius mode, adjust the temperature down below 200F and the DNA 40 will display degrees in Celsius


Evolv DNA40 Specifications
  • Power regulated digital switch-mode DC-DC converter
  • Temperature protection
  • Preheat
  • Step up/step down topology
  • Digital controls
  • Onboard buttons
  • Synchronous rectification for maximum battery life and minimal heat generation
  • Output power: 1 - 40 watts
  • Output voltage: 1 - 9.0 volts
  • Output current: 16.0 amps
  • Atomiser resistance - standard wire: 0.16 - 2.0 Ohms
  • Atomiser resistance - temperature sensing wire, cold: 0.10 - 1.0 Ohm
  • Input voltage: 3.1 - 4.3 volts
  • Input current: 0.5 - 16 amps

Evolv DNA40 Datasheet.pdf

Please note: Due to the strength of the US dollar, 15% GST and duty fees applied to all imports over 400 NZD we regrettably have to raise the price of the Vapor Flask DNA40 slightly. Please know we always strive to maintain fair pricing and avoid overcharging, the increase is only due to the aforementioned factors.

More Details →
Sold Out

Hana Modz Mini V3 DNA30

$229.95

Brand Hana Modz

This product is unavailable


The HANA MODZ V3 is a BILLET 6061 Aluminium DNA30 controlled battery pack with a 510 connector. Variable watt battery pack that lets you control wattage not voltage, for better consistency and repeatability. Built using high quality components. Power regulated digital switch-mode DC-DC converter. It features a small OLED display, buttons and synchronous rectification for maximum battery life and minimal heat generation

The separate UP and DOWN button allows the user to increase or decrease the power level in .1 watt increments.

Built in DNA Charger; which is MICRO USB powered and provides a 500 milliamp charge current.

ATTENTION PACK V3: Battery must be installed in the proper position. + Positive side of battery towards the top of the device. - Negative side towards the bottom. Damage can occur if the battery is installed improperly. Warranty will be void if battery is installed incorrectly.

Warning: You must have a battery installed to be used as a pass-thru. Damage may occur if a battery is not properly installed. Charge port must be free of any liquid or debris before plugging in the micro USB charge cord. Serious damage can occur if charge area is not free of debris.‚Äč


PACK V3 - BATTERY NOT INCLUDED: Recommended batteries:

7-20 watts - AW IMR, Panasonic CGR
20+ watts - Sony VTC4/5


MINI PACK V3
Inbuilt 1200mah lithium polymer battery pack. The Mini Pack may be used as a pass-thru while charging.

Operating Discharge Temperature: -10 - 60 Degree Celsius

USERS GUIDE:
Normal operation watt setting: The power level currently set on the DNA 30D. Battery indicator: The current state of charge of the battery.

Volts display: The output voltage being supplied to the atomizer.

Ohms display: The resistance of the atomizer attached to the device. This is measured only when the unit is supplying power to the atomizer. At other times, it shows the most recent measurement.

Other modes:
Locked mode: Pressing the fire button five times with less than .7 seconds between presses will cause the device to enter Locked mode. In Locked mode, the device will not fire and the output power will not adjust accidentally. While in Locked mode, the screen will be off, except that pressing a button will show ‚ÄúLocked, Click 5X‚ÄĚ. To exit Locked mode, press the fire button 5 times.

Stealth mode: While locked, pressing the fire and down buttons simultaneously for five seconds will switch to stealth mode. In this mode the display is off. It will still show error and lock messages. To switch back to normal display mode, hold down the fire and down buttons simultaneously for 5 seconds. This setting is stored to internal flash memory, and remains if power is removed.

Right mode & left mode: While locked, holding the fire and up buttons simultaneously for 5 seconds flips the display. This setting is stored to internal flash memory, and remains if power is removed.

Power locked mode: Holding down both the up and down buttons for two seconds will place the device in Power Locked mode. In this mode, you will not be able to change the power setting. This mode prevents accidental power level changes due to the buttons being pressed while in a pocket. To exit Power Locked mode, hold the up and down buttons for two seconds.

Error Messages: The DNA 30 will indicate a variety of error messages, as follows:

Check atomizer: The DNA does not detect an atomizer, the atomizer has shorted out, or the atomizer resistance is incorrect for the power setting.

Shorted: The atomizer or wiring are short circuited.

Check battery: The battery is below 3.1 volts. It probably needs to be charged.

Weak battery: The battery sags excessively when firing. This typically means the user is not using a high rate battery, or the battery is old and degraded. It can also mean the battery is not making good contact.

Too hot: The DNA 30D has onboard temperature sensing. It will shut down and display this message if the internal board temperature becomes excessive.

Too low power setting: The DNA 30D puts out a minimum of 4 volts. With low power settings (7 to 8 watts) and low resistance atomizers (below 2 ohms) the DNA will sometimes be unable to provide a low enough power output to be power regulating. If this is the case, the Ohms display will be flashing. The device will still operate.

Device resets: If the battery is not able to power the device at the desired setting, or the battery is excessively discharged, the device may go immediately into a low voltage shutdown. If firing the device causes the screen to blank out and then display the welcome screen, you should charge, replace or upgrade your battery. This is especially common at power settings above 20 watts.

Auto power down: The screen will be at full brightness while firing. After 15 seconds with no button presses, the screen will dim. 2 minutes after the last button press, the screen will fade out and the device will go to sleep mode. Pressing any button will turn the device and display back on.

DNA30 Specs: Minimum Typical Max
Output Power 7 Watts 30 Watts
Output Voltage 4 Volts 8.3 Volts
Output Current 10 Amps
Atomizer Resistance .3 Ohms 1.5 Ohms 3.3 Ohms
Input Voltage 3.2 Volts 3.7 Volts 4.3 Volts
Input Current 1.5 Amps 6.0 Amps 7 Amps
Efficiency 94%

HANA MODZ PACK V3 DIMENSIONS
LENGTH: 1.94"
WIDTH: 1"
HEIGHT: 3.43"


HANA MODZ MINI PACK V3 DIMENSIONS:
LENGTH: 1.65"
WIDTH: 1"
HEIGHT: 2.65"

Because of the machining process of the material (billet 6061 aluminum), along with the chemical reaction anodizing has on the effect of the material, some imperfections may arise.

WE OFFER A 90 DAY WARRANTY AGAINST MANUFACTURER'S DEFECTS. WARRANTY WILL BE VOID IF YOU EXCEED THE OPERATING DISCHARGE TEMPERATURE (-10 - 60 Degree Celsius). TAMPERING WITH THE ELECTRONICS AND/OR USING A NON-RECOMMENDED BATTERY WILL ALSO VOID YOUR WARRANTY. USE AT YOUR OWN RISK.
More Details →

SMOK Alien 220w Mod

$119.95

Brand SMOK

The Alien 220w is the latest high wattage mod from SMOK with a maximum power output of 220 watts. Accurate temperature control in Nickle 200, Stainless Steel and Titanium along with TCR function. The huge screen provide loads of information and live readings of amps, volts, battery and internal temperature. The Alien 220w also supports balance charging and is firmware upgradable.

For batteries we recommend: Samsung 25R5, Sony VTC5

  • 220 watts
  • VW/TC function (SS,Ti, Ni200, TCR)
  • Firmware upgradeable
  • Huge bright LCD screen
  • Balance charging
  • Small compact size
  • Requires 2x high drain 18650 batteries (not included)¬†
Specifications
Size: 85 x 44 x 28.4mm
Power range: 1W-220W
Resistance range: 0.1ő©-3ő© (VW) / 0.06ő©-2ő© (TC)
Temperature range: 200‚ĄČ--600‚ĄČ/100‚ĄÉ--315‚ĄÉ


In the box
1x Alien 220w Mod
1x USB cable for charging or upgrading
1x User manual

More Details →

SMOK G-PRIV Touchscreen w/ TFV8 Big Baby Kit // 220w

$189.95

Brand SMOK

The SMOK G-PRIV 220 is the latest high power vape kit to hit New Zealand and it's extremely large, bright and clear 2.4" TFT touchscreen doesn't disappoint. Equiped with SMOK's latest chip and advanced firmware, the G-Priv is a powerful and accurate 220 watt vaping device. It's software running the latest in vape tech advances including temperature control with stainless steel, Nickle200, titanium and TCR function and the intuitive touch screen menu system makes making selections easy and fast.

G-PRIV Touchscreen 220w Mod
Size: 85 x 58.5 x 28mm
Voltage Range: 0.35 - 8V
Power Range: 1 -220W
Resistance Range: 0.1 -3ohm (VW) / 0.06 -2ohm (TC)
Temperature Range: 200‚ĄČ--600‚ĄČ/100‚ĄÉ--315‚ĄÉ
Battery: dual 18650 batteries (not included)

In the box
1x G-PRIV Touchscreen 220w Mod
1x TFV8 Big Baby tank
1x V8 Baby-X4 Core coil head (preinstalled)
1x V8 Baby-T6 Core coil head

1x Replacement glass tube
1x USB cable
1x User manual
1x Spare parts

More Details →

SMOK G-PRIV Touchscreen 220w Mod

$144.95

Brand SMOK

The SMOK G-PRIV 220 is the latest high power vape mod to hit New Zealand and it's extremely large, bright and clear 2.4" TFT touchscreen doesn't disappoint. Equiped with SMOK's latest chip and advanced firmware, the G-Priv is a powerful and accurate 220 watt vaping device. It's software running the latest in vape tech advances including temperature control with stainless steel, Nickle200, titanium and TCR function and the intuitive touch screen menu system makes making selections easy and fast.

G-PRIV Touchscreen 220w Mod

Size: 85 x 58.5 x 28mm
Voltage Range: 0.35 - 8V
Power Range: 1 -220W
Resistance Range: 0.1 -3ohm (VW) / 0.06 -2ohm (TC)
Temperature Range: 200‚ĄČ--600‚ĄČ/100‚ĄÉ--315‚ĄÉ
Battery: dual 18650 batteries (not included)

In the box
1x SMOK G-PRIV Touchscreen 220w Mod
1x USB cable
1x User manual
1x Spare parts

More Details →
Sold Out

Phenom

$194.99

Brand Vicious Ant

This product is unavailable

Vicious Ant have designed an ingenious switch for the Phenom. A smooth quarter turn of 90 degrees to lock or unlock. The cap is a hybrid style and a tool for unscrewing it from both the mod and if necessary from your atomiser is included. Available in mixed stainless steel & brass and simply stainless steel, the Phenom is an eye catching mod that performs as good as it looks.

More Details →

iJOY RDTA Box 200w Kit // 12.8ml

$119.95

Brand iJoy

The iJOY RDTA Box 200W Kit combines a huge 12.8ml eliquid capacity tank and the iJOY IMC interchangeable building deck system with the IJOY COMBO RDTA and IJOY Limitless RDTA classic edition, providing expandability and versatility. Likely the first of a new wave of high liquid capacity devices and it's now available in New Zealand.

  • IMC Interchangeable building deck
  • More than 10 decks to choose from
  • 0.96-inch OLED Screen
  • Unique custom user mode
  • Tank capacity: 12.8ml
  • 15mm wide filling hole
  • Delrin and stainless steel chuff cap
  • NI/TI/SS temperature control
  • Output wattage: 5-200 watts
  • Output voltage: 1-8 volts
  • Output current: 1-45 amps
  • Resistance range: 0.05-3.0 ohm
  • Energy conversion rate: 95%
  • Battery type: dual 18650 (not included)
  • Firmware upgradeable
  • Dimensions: 105mm x 55mm x 28mm
In the box

1 x RDTA Box Mod
1x IMC-3 Interchangeable gold plated deck
1x IMC-Coil 3 pre-made coil
1x Screwdriver
1x Manual
1x USB cable
1x Tool pack

More Details →