Tesla Invader IV Kit / Invader IV RDA // 280W

$129.00

Or 4x interest free payments of $32.25 NZD

Brand Teslacigs

The Tesla Invader IV 280W Kit has arrived at The Vape Shop NZ. With the massive success of its predecessor, Teslacigs have released their new, lighter VV Tesla Invader IV with Invader IV RDA. Now compatible with dual 21700, 20700 or 18650 batteries, essentially improving the potential battery life, while retaining the same performance of high drain 18650s. 

The Invader series are an incredibly durable range of mods that are built to last. With more range of power on the 5 step potentiometer and increased resistance range, the Invader IV is able to run between 3-8 volts and down to 0.08Ω.

The highly anticipated Tesla Invader IV is one of the most reliable, hard hitting mods on the market. While the Invader IV hits like a series mechanical mod, it still has the safety features of a standard regulated mod without all the bells and whistles getting in your way. Plus the innovative Invader 4 RDA which features convenient dual coils build deck, adjustable bottom airflow system and Resin wide bore drip tip, the Teslacig Invader IV Kit is definitely an excellent vape device.

With incredible efficiency and no nonsense design, the Tesla Invader IV is the perfect choice for people who want unadulterated power and ease of use. The Invader IV has a maximum power output of 280W. The Invader IV also supports USB input charging, so you don't need to rely on an external charger to charge your batteries.

We advise a thorough understanding of ohm’s law for using this variable voltage device. You will need to calculate the correct voltage to achieve the wattage level that your coil/s require.

Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries. 

  • Dimension: 92 x 60 x 28mm
    • Material:  Aluminium alloy
  • RDA Dimensions: 25 x 34mm
    • Dual post build deck
  • Cell Type: Two high-drain 18650/20700/21700 cells
    • Batteries Sold Seperately
  • Maximum Output Wattage: 280W
    • Voltage Adjust: I-V level
    • Output Voltage Range: 3-8V
    • Maximum Output Current: 53A
  • Resistance Range: 0.08ohm-3.0ohm
    • Input Voltage Range: 6.4V-8.4V
    • Standby Current: <50uA 
    • USB: 5V/1.5A
  • LED Indicator: Blue-Green-Red
  • Protections: Over puffing protection, reverse connection protection, atomizer short-circuit protection, low voltage alert, overheat protection, over-current protection 
  • Thread: 510

In The Box

1x Invader 4 Mod
1x Invader 4 RDA
2 x Wires
3 x Silicone Rings
1x Wrench
4 x Screws
Organic Cotton
USB Cable
2 x User Manuals
      More Details →

      CUSTOMER REVIEWS

      No reviews yet Write a review

      Tesla Invader IV Mod // 280W

      $109.00

      Or 4x interest free payments of $27.25 NZD

      Brand Teslacigs

      The Tesla Invader IV 280W Mod has arrived at The Vape Shop NZ. With the massive success of its predecessor, TeslaCigs have released their new, lighter VV Tesla Invader IV. Now compatible with dual 21700, 20700 or 18650 batteries, essentially improving the potential battery life, while retaining the same performance of high drain 18650s. 

      The Invader series are an incredibly durable range of mods that are built to last. With more range of power on the 5 step potentiometer and increased resistance range, the Invader IV is able to run between 3-8 volts and down to 0.08Ω.

      The highly anticipated Tesla Invader IV is one of the most reliable, hard hitting mods on the market. While the Invader IV hits like a series mechanical mod, it still has the safety features of a standard regulated mod without all the bells and whistles getting in your way. 

      With incredible efficiency and no nonsense design, the Tesla Invader IV is the perfect choice for people who want unadulterated power and ease of use. The  The Invader IV has a maximum power output of 280W, and fires down to a super low 0.08ohm. The Invader IV also supports USB input charging, so you don't need to rely on an external charger to charge your batteries.

      We advise a thorough understanding of ohm’s law for using this variable voltage device. You will need to calculate the correct voltage to achieve the wattage level that your coil/s require.

      • Dimension: 92 x 60 x 28mm
      • Material:  Aluminium alloy
      • Cell Type: Two high-drain 18650/20700/21700 cells
      • Maximum Output Wattage: 280W
      • Voltage Adjust: I-V level
      • Output Voltage Range: 3-8V
      • Maximum Output Current: 53A
      • Resistance Range: 0.08ohm-3.0ohm
      • Input Voltage Range: 6.4V-8.4V
      • Standby Current: <50uA 
      • USB: 5V/1.5A
      • LED Indicator: Blue-Green-Red
      • Protections: Over puffing protection, reverse connection protection, atomizer short-circuit protection, low voltage alert, overheat protection, over-current protection 
      • Thread: 510

      In The Box

      • 1x Invader IV Mod
      • 1x USB Cable
      • 2x 18650 Adapters 
      • 1x Information Card
      More Details →

      CUSTOMER REVIEWS

      Based on 1 review Write a review