Introducing Vandy Vape's premier Mouth-To-Lung RTA - now available in NZ! Inspired by Alex from VapersMD, the Berserker is a 24mm rebuildable tank and holds 2ml of e-liquid with the Ultem tank section, but the chamber can be changed out to fit a higher capacity 4.5mL glass tank section.

The build deck is size is 9.5mm to accommodate small builds that are typically used for mouth-to-lung. Along with the small build deck, four hooks are available for users to wrap their coils around them to prevent the coil from shorting. On the building deck are two 6.5mm wicking ports to saturate the cotton. Juice enters the Berserker through two 9mm by 4mm juice slots located on the top.

Airflow can be adjusted from increments of 0.8mm, 1.0mm, 1.2mm, 1.4mm, and 1.6mm, allowing users to mimic the draw of a traditional cigarette.

The Berserker MTL RTA by Vandy Vape creates optimal flavour recreation and great building functionality, making this one of the more versatile mouth-to-lung rebuildable tank atomisers available today.

Product Specifications:

• 24mm
• Threaded Top Fill System
  • Two Large Kidney Fill Ports
    • 9mm by 4mm Each Fill Port
  • 2ml Ultem Tank Section
  • 4.5ml Glass Tank section
    • Interchangeable by Replacing Chamber
• Two Post, Single Terminal Build Deck
  • PEEK Insulated Positive Post
  • Top Mounted Phillips Screws
  • Single Internal Air Tube on Build Deck
  • Dual Wicking Ports
• Dual Adjustable Bottom Airslots
  • Adjustable Airslot Sizes (mm)
    • 0.8
    • 1.0
    • 1.2
    • 1.4
    • 1.6
• 5mm Bore ULTEM Drip Tip
• 5mm Bore Delrin Drip Tip
• Gold Plated 510 Pin

The most highly anticipated hardware release of 2018 is finally here: the Vandy Vape Bonza Kit has landed! 

Designed in collaboration with the one and only Vaping Bogan, the Bonza Kit is the absolute pinnacle of modern mech tube design. From its stippled exterior to its smoothly machined interior, every inch of this thing is a work of art, and boy oh boy does it pack a punch.

Compatible with 18650/20700 and 21700. The Bonza utilities pure copper to help conduct electricity, or full stainless steel.

OHM-MY he's hit the nail on the mark with this one!

• Maximum Dimensions: 118.4mm x 27mm
• Interchangeable sleeve system offers further customisation in the future
• Battery: single 21700 / 20700 / 18650 (sold separately)
• Magnetic and spring buttons included
• Insulated ring and tube provide extra safety
• 510 hybrid connection
• Pure copper conducts efficiently and with minimal voltage drop
• Improved post deck easier to build than ever
• Top cap locking and new dual AFC

In The Box

• 1 x Bonza Mech Mod
• 1 x Bonza 1.5 RDA
• Accessory Bag (o-rings, screws, BF pin, screwdriver)
• User Manual
• 1 x 18650 Battery Adaptor
• 1 x 510 Adaptor

If you are new to vaping and do not have a clear understanding and comprehension of Ohms Law and battery safety, this is not the device for you. 
This is an unregulated, mechanical device. Improper use, or build on this device can cause serious bodily harm. Never use batteries that are torn, nicked or dented with this device. 
The Vape Shop will not claim liability for any results of improper use. If you have any concerns, contact our support team for more information on mechanical devices.

Vandy Vape's Kylin RTA is now available in New Zealand!

Presenting with a gold plated postless single or dual coil design build deck and with an extendable tank capacity from 2mL to 6mL, this stunning RTA is paired with a bold bottom draw airflow structure, providing a smooth and flavoursome vape.

Performance is achieved via the quad air flow channels, two of which are placed directly under the coils allowing for immense flavour, while the additional air channels circulate the side and up towards the centre chimney providing a smooth, dense vapour.

The air flow control has a three step tactile adjustment method, ensuring that your airflow won't be accidentally repositioned while on the go.

Specifications

• 24mm Diameter Base
• 26mm at Widest Point
• Threaded Top Fill Design
• 2ml Standard Capacity
• 6ml Maximum Capacity
• Chimney Extension and 6ml Glass Included
• Postless Quad Terminal Build Deck
• 3.5mm by 2mm Each Terminal
• Side Mounted Hex Screws
• 6mm Space Between Terminals
• Two 3mm by 3mm Centralized Air Channels
• Two 6.5mm by 2mm Outer Airslots
• Two Unified Wicking Port Cutouts
• 10mm by 4mm Each Cutout
• Adjustable Juice Flow Control
• PEEK Insulator
• Gold Plated Build Deck
• Dual Adjustable Airflow
• Three Positive Locking Positions
• 14mm by 2mm Each Airslot
• PEEK Splitter Divides into Two Sides
• 24K Gold Plated 510 Contact
• 304 Stainless Steel and Glass Construction
• 810 Drip Tip
• 9.5mm Bore Delrin Drip Tip
• 13mm Outer Diameter
• 11mm Bore Delrin Drip Tip
• 16.5mm Outer Diameter
• 10mm Bore Delrin Drip Tip
• 18mm Outer Diameter
• 510 Drip Tip Adapter

In The Box

• One Vandy Vape Kylin RTA
• One Chimney Extension
• One Spare 2ml Glass Section
• One 6ml Glass Section
• Drip Tip Set
• One Hex Key
• Spare Part Pack
• User Manual

The Kylin V2 RTA by Vandy Vape has touched down in NZ. The latest rendition of the original, combining elements of the Kylin Mini. Featuring an updated post-less four terminal 24K gold-plated build deck with updated airflow system and advanced Juice Flow Control. Also replacing the threaded top fill cap, with a slide-to-open cap.

The new Kylin V2's airflow control is notably distinct with its air hole orientation around the build deck and coils allowing for maximum flavour and cloud production.

• 24mm Diameter Base
  • 30mm at Widest Point (with bubble glass installed)
• Slide-To-Open Top Fill Design
  • 11mm by 5mm Juice Fill Port
  • 3mL Standard Capacity
  • 5mL Maximum Capacity
• Curved Post-less Quad Terminal Build Deck
  • 2mm by 1.75mm Terminal Slot Size
  • Diagonally Mounted Hex Screws
  • Six 4mm by 1.5mm Airflow Cutouts
  • Eight Centered 1mm Air Holes
  • Dual Wicking Port Cutouts
    • 8mm by 3.5mm Internal
    • 8mm by 2mm External
    • Adjustable Juice Flow Control
  • PEEK Insulator
• Dual Adjustable Airflow
  • Beveled Air Flow System
  • Fully Adjustable Airflow Ring
    • 12mm by 2.5mm Each Airslot
• 24K Gold Plated 510 Contact
• 304 Stainless Steel and Glass Construction
• 810 Drip Tip
  • 13mm Wide 810 Short Delrin Drip Tip
  • 12mm Wide 810 Tapered Resin Drip Tip

After much anticipation the VandyVape x Tony B Pulse BF 80W Box Mod has hit The Vape Shop NZ stores!

Following the huge success of its unregulated predecessor, this 80W mod is sure to please squonk mod lovers. Updated with VandyVape’s proprietary Vandy Chip and also a larger 8mL squonk bottle, we have some good feelings about this device!

Available in an array of different colours, including four beautiful coloured resin styles and two sleek carbon fibre designs with magnetic doors, this will be sure to look good in anyone’s hand!

The powerful Vandy Chip offers high-efficiency and high-accuracy including overheating, overcurrent, short circuit, open circuit, overtime, and reverse polarity protection; and also features a low battery warning.

Compatible with both 18650 and 20700 batteries (sold separately).

Specifications

• Size: 54 x 25.9 x 82 mm
• Max wattage output: 80 watts
• Connection threading: 510

In The Box

• Vandy Vape Pulse BF 80W Box Mod
• 8 mL Squonk Bottle
• QC USB Cable
• Instructional Manual
• 18650 Battery Adapter

The Pulse Bottom Feed Squonk Box Kit by Vandy Vape has touched down in NZ! Taking a single 18650 or 20700 battery the Pulse is the first of its type in being completely affordable without sacrificing quality in its design. The device has a simple aesthetic with a side magnetic door that reveals the internal battery and squonk bottle compartment. Inside includes a manual disconnect for disabling the device while not in use so it may be pocketed without worry.

• Locking power switch to help avoid accidental firing when not in use
• Spring loaded 510 pin to accept many different length 510 pins of various designs
• 8mL food grade soft squeeze silicone bottle
• Copper contacts
• Replaceable front and back panels
• Manual Battery Disconnect
• Requires a high amp 18650 or 20700 battery purchase here: Batteries
• 8.0m food grade silicone bottle for squonking

Retaining similar aesthetics from the original with a simple yet elegant appeal, the latest RDA in NZ from Vandy Vape, the Pulse 24 measures 24.4mm in diameter, innovative airflow style returns with side-mounted dual 3.5mm airslots that feeds into each pair of airflow tubes. The result is a concentrated and direct airway path to the deck with quad airflow tubes and acting as a leak resistant feature due to the angled orientation.

The Pulse 24 BF integrates a quad terminal postless design, large terminal openings set into the deck and tightened via side-secured Phillips screws. The deck and chamber accommodates a wide range of large coil structures and a large liquid well. The well is cleverly designed for an efficient squonk-ready set-up with the included bottom-feeding 510 pin that feeds directly into the two sides of the juice well.

In The Box
1x Pulse BF Squonk Box Mod
1x Pulse 24 BF RDA
1x 16mm Drip Tip
1 x 8ml Squonk Bottle
1x 18650 Battery Adaptor
2x Accessory Bags
1x User Manual

If you are new to vaping and do not have a clear understanding and comprehension of Ohms Law and battery safety, this is not the device for you. 
This is an unregulated, mechanical device. Improper use, or build on this device can cause serious bodily harm. Never use batteries that are torn, nicked or dented with this device. 
The Vape Shop will not claim liability for any results of improper use. If you have any concerns, contact our support team for more information on mechanical devices.

The Pulse Bottom Feed Squonk Box Mod by Vandy Vape has touched down in NZ! Taking a single 18650 or 20700 battery the Pulse is the first of its type in being completely affordable without sacrificing quality in its design. The device has a simple aesthetic with a side magnetic door that reveals the internal battery and squonk bottle compartment. Inside includes a manual disconnect for disabling the device while not in use so it may be pocketed without worry.

• Locking power switch to help avoid accidental firing when not in use
• Spring loaded 510 pin to accept many different length 510 pins of various designs
• 8mL food grade soft squeeze silicone bottle
• Copper contacts
• Replaceable front and back panels
• Manual Battery Disconnect
• Requires a high amp 18650 or 20700 battery purchase here: Batteries
• 8.0m food grade silicone bottle for squonking

In The Box
1x Pulse BF Squonk Box Mod
1x 18650 Battery Adaptor
1x User Manual

If you are new to vaping and do not have a clear understanding and comprehension of Ohms Law and battery safety, this is not the device for you. 
This is an unregulated, mechanical device. Improper use, or build on this device can cause serious bodily harm. Never use batteries that are torn, nicked or dented with this device. 
The Vape Shop will not claim liability for any results of improper use. If you have any concerns, contact our support team for more information on mechanical devices.

The Triple 28 RTA is a collaboration project by VandyVape and VapingwithTwisted420, presenting a 28mm diameter tank chassis with a unique six terminal, postless deck design that can be accommodated with Dual or Triple coil configuration. The Triple 28 RTA ability to produce immense flavour and vapour production stems from its core, inside, a postless build deck with a single air channels and large wicking cutouts. The Triple 28 integrates six terminal opening in which coil leads are set into the deck and tightened via side-tension Hex Screws.

The spacious chamber area design frees up build space while accommodating large coil structures and gives users the ability for Dual or Triple coil system. Airflow enters the Triple 28 through two large adjustable air slots, located on the bottom, redirecting into a single large internal airtube for a mighty cooling properties. Vandy Vapes keeps the user in mind by integrating knurling on the adjustable airflow control ring, adjustable juice flow control ring, and on the removable top cap for filling for ease of use.

Following the Kylin and GOVAD RTA's, the Triple 28 utilises a 810 drip tip platform and includes two 810 drip tips, one ULTEM, and one delrin, as well as a 510 drip tip adapter. Beautifully constructed, precision machined, and packing in the most intuitive and effective airflow systems across any atomiser today, VandyVape's Triple 28 RTA enters the market as a behemoth.

• 28mm Diameter Base
• Threaded Top Fill Design
  • 4ml Juice Capacity
• Postless Six Terminal Build Deck
  • 2.5mm by 2.5mm Each Terminal
  • Side Mounted Hex Screws
  • Two 10mm by 4mm Centralized Air Channels
  • Two Unified Wicking Port Cutouts
    • 11mm by 4mm Each Cutout
  • PEEK Insulator
• Dual Adjustable Airflow
  • 28mm by 2mm Each Airslot
• 24K Gold Plated 510 Contact
• 304 Stainless Steel and Glass Construction
• 810 Drip Tip
  • 11mm Bore ULTEM Drip Tip
    • 17.5mm Outer Diameter
  • 11mm Bore Delrin Drip Tip
    • 18.5mm Outer Diameter
• 510 Drip Tip Adapter

1x Spare Glass Section
Drip Tip Set
1x Hex Key
Spare Part Pack
User Manual