COVID 19 - ALL OUR SHOPS ARE OPEN DURING LEVEL 2 - FREE SHIPPING ON ALL NZ ORDERS! 🚚

Cloud Revolution - 'Game Over Man' Pre-buildable Coils

$24.95

Game Over Man coils are Alien Fused Claptons by Cloud Revolution. They've been a favorite for many people over the years and have received high praise from the likes of the Bogan in regards to their build quality and performance. Cloud Revolution doesn't use any Chinese wire in any of his coils, as a matter of fact - he uses the exact same wire as the Fat Kiwi

Original

The tri-core 26g Nichrome 80 gives you all the benefits of a fuse clapton coil and when combined with the unique wicking properties of the alien fuse - it makes this one coil that is hard to beat for an all round great performance.

  • Core: 3*26g Wire Buddha Nichrome 80
  • Alien Fuse: 36g Wire Buddha Nichrome 80
  • Wraps: 5
  • Inner Diameter: 3mm
  • Single Coil Resistance: 0.22
  • Dual Coil Resistance: 0.11

Triple 27 - 3/27/36

  • Core: Three Pieces of 27g Twisted Messes Nichrome 80
  • Alien Fuse: 36g Twisted Messes Nichrome 80
  • Wraps: 5
  • Inner Diameter: 2.5mm
  • Single Coil Resistance: 0.20-0.22
  • Dual Coil Resistance: 0.10-0.11

Triple 28 - 3/28/36

  • Core: Three Pieces of 28g Wire Buddha Nichrome 80
  • Alien Fuse: 36g Wire Buddha Nichrome 80
  • Wraps: 5
  • Inner Diameter: 2.5mm
  • Single Coil Resistance: 0.30-0.32
  • Dual Coil Resistance: 0.15-0.16
  • Above Resistance rating is dependent on lead length.

Game Over Man 3.5

The same materials as the Originals - just sized with a bigger diameter for your bigger atomisers!

  • Core Wire: 26G Nichrome 80
  • Alien Wrap: 36g Nichrome 80
  • Wraps: 5
  • Inner Diameter: 3.5mm
  • Single Coil Resistance: 0.26
  • Dual Coil Resistance: 0.13

Flavliens

  • Core: 10 x 0.3mm Nichrome 80 Ribbon Wire
  • Frame: Two Pieces of 30g Nichrome 80
  • Alien Fuse: 36g Nichrome 80
  • Wraps: 5
  • Inner Diameter: 3mm
  • Single Coil Resistance: 0.22Ω
  • Dual Coil Resistance: 0.11Ω

 

Rebuilding is for experienced users only and a knowledge of ohms’ law should be considered when building coils for Rebuildable Atomiser's. The distance of the coils from the post can affect the resistance of the build. Always exercise caution building your atomiser, always check your build’s resistance on an ohm reader before firing it on any device. Coils that are touching any part of the deck, air flow controller or any part of the coil touching any of the atomiser's posts can result in a short and can cause serious damage to your devices if not checked on an ohm reader before use. Make sure to use high drain and high amperage batteries when using advanced user devices. 

You might also like