An expansion to our starter kit range for our NZ online and brick and mortar shops, with a higher battery capacity than Joyetech eGo AIO, the Eleaf iJust S fits in to the mid-range device category perfectly.

The next generation of the iJust platform, designed to be a full size, all day version that packs a massive 3000mAh integrated battery coupled with the top-filled 4ml capacity iJust S Sub-Ohm Tank.

The iJust S utilises a direct output voltage system in which output is determined by the current state and level of the 3000mAh battery, and features a large range of compatibility with atomisers between 0.15 to 3.5ohms. The chassis retains the high end, heavy duty fit and feel while now measuring 24.5mm in order to support the increased battery capacity and is fitted with a side mounted Micro USB Port that supports up to a 1A input charge.

The iJust S is operated by the enlarged and raised single button which is surrounded by a LED light that offers feedback to the state of the system. A spring-loaded gold plated connection ensures consistent contact as well as allowing for compatibility with additional atomizers.

Included with the kit is the iJust S Sub-Ohm Tank, designed to match the 24.5mm diameter of the iJust S, while implementing a threaded top fill system. The tank reservoir measures 4ml in total, and utilises the EC coil family, with the new 0.18 ohm SS316L coil making its first appearance with this set.

Also included are the extremely well balanced 0.3ohm (pre-installed), 0.5 ohm EC heads, matching perfectly with the output curve of the iJust S battery. Airflow has seen a redesign from previous iJust tanks, with dual airslots measuring 12mm by 3mm each replacing the older quad airflow system. Built for modern day demands, the iJust S Kit offers outstanding battery life with a versatile Sub-Ohm Tank in an easy to use and affordable package.

Purchase replacement coils here - Eleaf EC & ECL Replacement Coills

iJust S Battery

• 3000mAh battery
• Single button operation
• LED feedback button
• Battery life indicator
• 24.5mm diameter
• Direct output voltage
• 0.15 to 3.5ohm atomiser resistance range
• Micro-USB charging port
• 1A max charging rate
• Spring-loaded gold plated connection
• Atomiser short circuit, no atomiser & low voltage protection

iJust S Sub-Ohm Tank

• 24.5mm diameter
• Threaded top fill
• Dual fill ports
• 4 Milliliter tank capacity
• Dual slotted airflow 12mm by 3mm
• Throttled via included silicone ring
• EC coil family
• Vertical Coil Arrangement
• Fully Detachable Structure
• Convenient Cleaning

In the box
1x Eleaf iJust S Kit
1x 0.3ohm EC Coil (pre-installed)
1x ECL 0.18 ohm coil
1x 0.5 ohm EC coil
1x Spare silicone ring
1x Micro USB charging cable
User Manual

The iStick Pico is an innovative and compact mod that you can hold in the palm of your hand. Powered by a single interchangeable 18650 cell, the iStick Pico provides up to a maximum of 75 watts output and features switchable VW/Bypass/TC-Ni/TC-Ti/TCR modes.

Requires 1x 18650 battery. We recommend the: Samsung 25R5, Sony VTC5

• Extremely compact and light weight
• Powered by a single high drain 18650 battery (not included)
• Micro USB charging (included)
• Firmware upgradeable
• Three customisable TCR settings for advanced users

1x Eleaf iStick Pico Mod 
1x USB cable
Instruction manual  

Power on and off: Install a high-rate 18650 battery (discharge current above 25A); press fire button 5 times continuously to turn on/off the device.

Vaping: Long press the fire button and take a puff.

Stealth function: While the device is on, simultaneously hold the fire button and the down button. This will allow you to switch between the Stealth on and off function.

Lock/unlock: While the device is on, simultaneously keep pressing up and down buttons for 2 seconds. This will allow to switch between lock and unlock.

Switch the display Mode: While the device is powered off, keep pressing up and down buttons simultaneously for 2 seconds, the display will rotate 180 degrees.

Shift between VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR mode: While the device is on, press the fire button 3 times in quick succession, the first row will flash to indicate you entering the menu. Press the up or down button to switch between different modes. Then press the fire button one time to confirm the mode you chose.

The iStick Pico Resin is now available in New Zealand! The surface finish of the resin feels soft, almost rubber like, the colours and patterns shine and glimmer at different angles as light penetrates hitting the varying dyed layers of the resin.

The ever popular Pico is an innovative and compact mod that you can hold in the palm of your hand. Powered by a single interchangeable 18650 cell that can easily be accessed through the battery screw top, providing up to a maximum of 75 watts output and features switchable VW/Bypass/TC-Ni/TC-Ti/TCR modes. Reinforced with brushed stainless steel trimming at the top and bottom of the unit, the Pico looks modern and functional all in a little powerful package.

Please note that due to the random nature of the dying process the colours vary, all look amazing with deep three dimensional effects!

Requires 1x 18650 battery. We recommend the: Samsung 25R, Samsung 30Q, Sony VTC5

• Extremely compact and light weight
• OLED screen
• On board charging (Micro USB)
• Firmware upgradeable
• Three customisable TCR settings for advanced users

Pico Specifications
Size: 45mm x 23mm x 70.5mm
Cell type: high discharge 18650 cell
Cell type: Maximum continuous discharge current should be above 25A
Output modes: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Output wattage: 1-75W
Resistance range: 0.05-1.5ohm (TC modes)
Resistance range: 0.1-3.5ohm (VW/Bypass mode)
Temperature range: 100－315℃/200－600℉ (TC modes) 

1x Eleaf iStick Pico Resin Mod
1x Micro USB charging cable
User manual

Power on and off: Install a high-rate 18650 battery (discharge current above 25A); press fire button 5 times continuously to turn on/off the device.

Vaping: Long press the fire button and take a puff.

Stealth function: While the device is on, simultaneously hold the fire button and the down button. This will allow you to switch between the Stealth on and off function.

Lock/unlock: While the device is on, simultaneously keep pressing up and down buttons for 2 seconds. This will allow to switch between lock and unlock.

Switch the display Mode: While the device is powered off, keep pressing up and down buttons simultaneously for 2 seconds, the display will rotate 180 degrees.

Shift between VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR mode: While the device is on, press the fire button 3 times in quick succession, the first row will flash to indicate you entering the menu. Press the up or down button to switch between different modes. Then press the fire button one time to confirm the mode you chose.

The iStick Pico Resin is now available in New Zealand! The surface finish of the resin feels soft, almost rubber like, the colours and patterns shine and glimmer at different angles as light penetrates hitting the varying dyed layers of the resin.

The ever popular Pico is an innovative and compact mod that you can hold in the palm of your hand. Powered by a single interchangeable 18650 cell that can easily be accessed through the battery screw top, providing up to a maximum of 75 watts output and features switchable VW/Bypass/TC-Ni/TC-Ti/TCR modes. Reinforced with brushed stainless steel trimming at the top and bottom of the unit, the Pico looks modern and functional all in a little powerful package.

Included in the full kit is a Melo 3 Mini tank to perfectly match with the Pico. The 2ml tank can be easily filled via the top cap and adjustable airflow is controlled at the bottom of the unit.

Please note that due to the random nature of the dying process the colours vary, all look amazing with deep three dimensional effects!

Requires 1x 18650 battery. We recommend the: Samsung 25R, Samsung 30Q, Sony VTC5

• Extremely compact and light weight
• OLED screen
• On board charging (Micro USB)
• Firmware upgradeable
• Three customisable TCR settings for advanced users

Pico Specifications
Size: 45mm x 23mm x 70.5mm
Cell type: high discharge 18650 cell
Cell type: Maximum continuous discharge current should be above 25A
Output modes: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Output wattage: 1-75W
Resistance range: 0.05-1.5ohm (TC modes)
Resistance range: 0.1-3.5ohm (VW/Bypass mode)
Temperature range: 100－315℃/200－600℉ (TC modes)

1x Eleaf iStick Pico Resin Mod
1x Eleaf Melo 3 Mini Tank
1x Eleaf EC 0.3Ω coil (preinstalled)
1x Eleaf EC 0.5Ω coil
2x Spare tank o-rings
1x Micro USB charging cable
User manual

Power on and off: Install a high-rate 18650 battery (discharge current above 25A); press fire button 5 times continuously to turn on/off the device.

Vaping: Long press the fire button and take a puff.

Stealth function: While the device is on, simultaneously hold the fire button and the down button. This will allow you to switch between the Stealth on and off function.

Lock/unlock: While the device is on, simultaneously keep pressing up and down buttons for 2 seconds. This will allow to switch between lock and unlock.

Switch the display Mode: While the device is powered off, keep pressing up and down buttons simultaneously for 2 seconds, the display will rotate 180 degrees.

Shift between VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR mode: While the device is on, press the fire button 3 times in quick succession, the first row will flash to indicate you entering the menu. Press the up or down button to switch between different modes. Then press the fire button one time to confirm the mode you chose.