Eleaf iStick Pico Resin
$56.90Or 4x interest free payments of $14.23 NZD
This product is unavailable
The iStick Pico Resin is now available in New Zealand! The surface finish of the resin feels soft, almost rubber like, the colours and patterns shine and glimmer at different angles as light penetrates hitting the varying dyed layers of the resin.
The ever popular Pico is an innovative and compact mod that you can hold in the palm of your hand. Powered by a single interchangeable 18650 cell that can easily be accessed through the battery screw top, providing up to a maximum of 75 watts output and features switchable VW/Bypass/TC-Ni/TC-Ti/TCR modes. Reinforced with brushed stainless steel trimming at the top and bottom of the unit, the Pico looks modern and functional all in a little powerful package.
Please note that due to the random nature of the dying process the colours vary, all look amazing with deep three dimensional effects!
- Extremely compact and light weight
- OLED screen
- On board charging (Micro USB)
- Firmware upgradeable
- Three customisable TCR settings for advanced users
Size: 45mm x 23mm x 70.5mm
Cell type: high discharge 18650 cell
Cell type: Maximum continuous discharge current should be above 25A
Output modes: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Output wattage: 1-75W
Resistance range: 0.05-1.5ohm (TC modes)
Resistance range: 0.1-3.5ohm (VW/Bypass mode)
Temperature range: 100－315℃/200－600℉ (TC modes)
1x Eleaf iStick Pico Resin Mod
1x Micro USB charging cable
Power on and off: Install a high-rate 18650 battery (discharge current above 25A); press fire button 5 times continuously to turn on/off the device.
Vaping: Long press the fire button and take a puff.
Stealth function: While the device is on, simultaneously hold the fire button and the down button. This will allow you to switch between the Stealth on and off function.
Lock/unlock: While the device is on, simultaneously keep pressing up and down buttons for 2 seconds. This will allow to switch between lock and unlock.
Switch the display Mode: While the device is powered off, keep pressing up and down buttons simultaneously for 2 seconds, the display will rotate 180 degrees.
Shift between VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR mode: While the device is on, press the fire button 3 times in quick succession, the first row will flash to indicate you entering the menu. Press the up or down button to switch between different modes. Then press the fire button one time to confirm the mode you chose.