Nemesis Silver Rhodium Contacts
$39.95 $18.40Or 4x interest free payments of 25% on orders over $50
Brand The Vape Shop
This product is unavailable
From the manufacturer:
These contacts are extremely conductive but even more so they are “maintenance free” as Rhodium itself never oxidizes, corrodes, or tarnishes. You will see a dramatic reduction in the need to polish or clean these and your device will fire consistently with little variation in voltage output as Rhodium creates the resistance to electrical arcing, which happens when electricity jumps the gap just before and after a switch makes contact and this creates hot spots that oxidize.
I have put a lot of time into the development of these contacts, as I wanted to make sure that the layer of silver applied to the brass was thick enough to source the conductivity while the rhodium was thin enough that it would only play its role in adding anti-oxidation properties.
The quality and performance of these contacts speak for themselves. Given my background, all materials, machining, and plating, are Aerospace quality and produced in Southern California.
You might also like
$119.00Or 4x interest free payments of $29.75 NZD
Brand Vandy Vape
The most highly anticipated hardware release of 2018 is finally here: the Vandy Vape Bonza Kit has landed!
Designed in collaboration with the one and only Vaping Bogan, the Bonza Kit is the absolute pinnacle of modern mech tube design. From its stippled exterior to its smoothly machined interior, every inch of this thing is a work of art, and boy oh boy does it pack a punch.
Compatible with 18650/20700 and 21700. The Bonza utilities pure copper to help conduct electricity, or full stainless steel.
OHM-MY he's hit the nail on the mark with this one!
- Maximum Dimensions: 118.4mm x 27mm
- Interchangeable sleeve system offers further customisation in the future
- Battery: single 21700 / 20700 / 18650 (sold separately)
- Magnetic and spring buttons included
- Insulated ring and tube provide extra safety
- 510 hybrid connection
- Pure copper conducts efficiently and with minimal voltage drop
- Improved post deck easier to build than ever
- Top cap locking and new dual AFC
In The Box
- 1 x Bonza Mech Mod
- 1 x Bonza 1.5 RDA
- Accessory Bag (o-rings, screws, BF pin, screwdriver)
- User Manual
- 1 x 18650 Battery Adaptor
- 1 x 510 Adaptor
If you are new to vaping and do not have a clear understanding and comprehension of Ohms Law and battery safety, this is not the device for you.
This is an unregulated, mechanical device. Improper use, or build on this device can cause serious bodily harm. Never use batteries that are torn, nicked or dented with this device.
The Vape Shop will not claim liability for any results of improper use. If you have any concerns, contact our support team for more information on mechanical devices.
$26.90Or 4x interest free payments of 25% on orders over $50
Pack of four replacement coils for the Uwell Crown 4 (IV)
- 0.2Ω Dual SS904L Coil - rated for 70-80W
- 0.4Ω Dual SS904L Coil - rated for 60-70W
$114.00Or 4x interest free payments of $28.50 NZD
Introducing Vaporesso's latest powerhouse to NZ - the Armour Pro. Beautiful, sophisticated, and elegant, the Armour Pro's clean lines and simplicity belie a powerful Omni Board 4.0 chipset capable of a maximum output of 100W. Matched perfectly with the Cascade Baby Sub-Ohm tank. The Cascade Baby comes preinstalled with the GT Mesh Coil which allow it to evenly heat the entire coil head, providing great flavour.
A 0.96 inch colour screen displays essential information to the user, such as: wattage/temperature, atomiser resistance, and individual battery life display. The screen itself is built into the firing button and blends seamlessly into the Armour Pro's luxurious form and function.
The Armour Pro is powered by a single 18650 battery, or can also utilise 20700/21700 batteries for users requiring extended battery life. The advanced Omni Board 4.0 chipset features six different output modes, multiple protection systems, and can utilise 2A quick charging - no need to wait all day for your batteries to charge!
With an incredible 0.002s firing speed and a total atomiser resistance range of 0.03 - 5.0Ω, the Armour Pro will have you enjoying pure, rich flavour and smooth, silky clouds all day!
- 5 to 100W Output
- OMNI Board 4.0
- Six Total Output Modes
- 0.002 Second Firing Speed
- Super Player Mode
- 0.03 to 5.0Ω Atomiser Resistance Range
- 0 to 8.5V Voltage Range
- Smart VW
- Automatically Recommend Ideal Output
- Can Easily Adjust
- Customised Curve of Wattage (CCW)
- Customise Wattage Output By Second Increments
- Customise Ramp Up by 0.5 Second Increments
- Customised Curve of Voltage (CCV)
- Customise Voltage Output By Second Increments
- Bypass Mode
- Firmware Upgradeable
- OMNI Board 4.0
- Temperature Control Suite
- Ni200 Nickel Support
- Titanium Support
- SS316 Support
- Customized Curve of Temperature (CCT)
- Customize Temperature Output Over Time
- TCR Mode
- 200 to 600 Degrees Fahrenheit
- Atomiser Lock
- Magnetized Battery Bay Access
- Single 21700/20700/18650 Battery Powered (sold separately)
- Sleek and Beautiful Chassis Design
- Futuristic Styling
- Four Button Control
- Oversized Firing Button
- Screen Integrated Into Firing Button
- Angular Adjustment Buttons
- Mode Button
- Oversized Firing Button
- 0.96" Inch TFT Display
- Temperature Mode and Output
- Output Power
- Atomiser Resistance
- Individual Battery Life Indicator
- Remaining Charging Time (RCT)
- Puff Counter
- 2A Quick Charge System
- Remaining Charging Time
- Equalising Charge System
- USB Input Protection
- Micro USB Charging Port
- In-Mould Labeling (IML) Injection Coating and Aluminum Alloy Chassis
- Spring Loaded Gold Plated 510 Connection
- Burn Protection/Overtime Protection/ Overcharge Protection/ No Load Protection/ Low Resistance Protection/ ESD Circuit Protection/ Short-Circuit Protection/ Low Power Protection/ Pass-Through Protection
In The Box
1x Vaporesso Armour Pro 100W TC Box Mod
1x Vaporesso CASCADE Baby Sub-Ohm 5mL Tank
1x 0.18Ω GT Meshed Coil - Preinstalled
1x GT 0.3Ω CCELL2 Coil
1x Micro USB Charging Cable
1x Battery Adapter
User Manual and Warranty
$54.00Or 4x interest free payments of $13.50 NZD
Brand Vandy Vape
The Kylin V2 RTA by Vandy Vape has touched down in NZ. The latest rendition of the original, combining elements of the Kylin Mini. Featuring an updated post-less four terminal 24K gold-plated build deck with updated airflow system and advanced Juice Flow Control. Also replacing the threaded top fill cap, with a slide-to-open cap.
The new Kylin V2's airflow control is notably distinct with its air hole orientation around the build deck and coils allowing for maximum flavour and cloud production.
24mm Diameter Base
- 30mm at Widest Point (with bubble glass installed)
- Slide-To-Open Top Fill Design
- 11mm by 5mm Juice Fill Port
- 3mL Standard Capacity
- 5mL Maximum Capacity
- Curved Post-less Quad Terminal Build Deck
- 2mm by 1.75mm Terminal Slot Size
- Diagonally Mounted Hex Screws
- Six 4mm by 1.5mm Airflow Cutouts
- Eight Centered 1mm Air Holes
- Dual Wicking Port Cutouts
- 8mm by 3.5mm Internal
- 8mm by 2mm External
- Adjustable Juice Flow Control
- PEEK Insulator
- Dual Adjustable Airflow
- Beveled Air Flow System
- Fully Adjustable Airflow Ring
- 12mm by 2.5mm Each Airslot
- 24K Gold Plated 510 Contact
- 304 Stainless Steel and Glass Construction
- 810 Drip Tip
- 13mm Wide 810 Short Delrin Drip Tip
- 12mm Wide 810 Tapered Resin Drip Tip
$52.95Or 4x interest free payments of $13.24 NZD
The Crown has been reinvented. With the enormous success of its predecessors, the Crown IV by Uwell has finally arrived!
The sleek new visual stainless steel design, with the larger 6mL bubble glass gives you a more aesthetic all day vaping tank. Introducing Uwell's innovative patented self-cleaning technology, you will never have to worry about leaking or condensation build up in your atomiser's base. Through regular use, the self-cleaning technology will absorb the juice and condensation allowing you to never waste a drop.
Every tank is thoroughly checked and hand polished to perfection.
The Crown IV uses a plug-and-pull coil system, so eliminating the chance of cross-threading your coil heads.
Also new with the Crown IV, is the Dual SS904L coil, giving you longer lasting, better flavour production than standard SS316L coils.
Dual SS904L Coil 0.2 Ω = 70-80 W
Dual SS904L Coil 0.4 Ω = 60-70 W
FeCrAl UN2 Coil 0.23Ω = 60-70 W
$0.30Or 4x interest free payments of 25% on orders over $50
Brand Kidney Puncher
Torn or nicked battery wrap sleeve? Get your batteries back in safe condition with these!
These may need to be cut before shrinking on a battery to battery basis.
If your batteries are damaged by any means of denting, puncturing or ripped insulator, do not use within your device!
$14.90Or 4x interest free payments of 25% on orders over $50
A five pack of Vaporesso EUC Replacement Coil featuring a thread-less design that fits directly into the Vaporesso Veco Solo and One Plus Kit.
0.3Ω SS316L Ceramic: 35 to 40W
$99.00Or 4x interest free payments of $24.75 NZD
The Wismec Reuleaux RX GEN3 TC Box Mod presents the third generational device of the Reuleaux series, integrating a triple 18650 battery powered chipset capable of an impressive output of 300W in a renovated chassis for a complete all-around device.
The GEN3 mod, is smaller, lighter and more ergonomic than previous versions. Having a large 1.3inch OLED screen and brand-new interface.
A continuation of Wismec's vaulted chipset, the RX GEN3 can fire up to a staggering 300W with comprehensive temperature control and onboard support for Ni200 Nickel, Titanium, and Stainless Steel coil types. In temperature control mode, it features an adjustable TCR mode that allows for expanded compatibility and fine tuning.
- Triple 18650 Battery Platform
- Wattage Output Range: 1-300W
- Maximum Output Current: 50A
- Minimum Atomizer Resistance: 0.05ohm
- Temperature Range: 200-600F
- Versatile Temperature Control Module
- Supports Ni200 Nickel, Titanium, and Stainless Steel in Temperature Control
- TCR Adjustment Modes
- Preheat Function
- Soft Poly-Angular Frame
- Intuitive 1.3 Inch OLED Display
- Oversized Firing Buton
- Two Adjustment Buttons
- Hinged Battery Door
- Battery Balance Charge System
- Dual Circuit Protection
- Onboard Reverse Polarity Protection
- Upgradeable Software
- MicroUSB Port - Firmware Upgrades
- Spring-Loaded Stainless Steel 510 Connection
In The Box
- 1x RX GEN3 Box Mod
- 1x QC USB Cable
- Instructional Manual